Need gt55 turbine housing measurements.

[mike diesel]

I am in need of a few measurements if anyone has a gt55 housing laying around they could measure. Need to see if a gt55 housing will work on my turbo, I have already confirmed the turbine wheel is the exact specs of a gt55 turbine...just not sure on the housing.

Specs I'm looking for...

 

[mike diesel]

 

[Evan@InglewoodTrans]

I can get you some measurements off the one I have at the shop in the morning if you can't find any before then.

 

[mike diesel]

I can get you some measurements off the one I have at the shop in the morning if you can't find any before then.

That would be awesome.

 

[mike diesel]

I can get you some measurements off the one I have at the shop in the morning if you can't find any before then.

You get a chance to grab some measurements?

 

[matt05]

Have you tried calling Forced Inductions yet? I would think they would know of a smaller housing (if there is one) that will work for you.

 

[mike diesel]

I believe I found a housing. But would still like to confirm.

 

[Yellow Jacket]

I can measure one after work today...

 

[Yellow Jacket]

I believe I have a .9 and a 1.24 Garrett housings for a gt55 turbo...

 

[mike diesel]

Evan sent me some specs. They are very close In comparison. It looks like the gt55 turbine is almost 1mm larger on the inducer. Other than that, I think it would work. I'm afraid that 1mm difference will make the turbine too loose in the housing.

 

[mike diesel]

I believe I have a .9 and a 1.24 Garrett housings for a gt55 turbo...

You wouldn't want to let a brotha borrow that .90 for a test fit would ya

 

[Yellow Jacket]

You wouldn't want to let a brotha borrow that .90 for a test fit would ya

They are high dollar housings....I'd hate for it to disappear or not come back!

 

[Yellow Jacket]

But that could be a possibility... :thumb:

 

[mike diesel]

I feel ya

 

[CurtisEmery]

As long as the radius profile form the inducer to the exducer is the same 1mm wont have any effect. Its more about proper housing to wheel radius clearance.