My turbo ate something

[hondarider552]

:roflmao:

 

[Kappa9012]

I wouldn't have touched it with such few nicks, as long as the bearings felt tight.

 

[ChevyDieselLLY]

well if you are going to take the turbo off you might as well remove the intake runners and if you take them off you might as well take off the heads. should make sure nothing got in the motor at all.

sorry to hear about your troubles.

 

[x MadMAX DIESEL]

Might as well not change it. It looks perfectly fine. I wouldn't worry about one bit.

Sent from my PC36100 using Tapatalk

 

[paint94979]

I'm not pulling the turbo a wheel swap can be done with the turbo in place.

 

[Chevy1925]

13hrs and 30min left!!!!!

 

[paint94979]

Lol :roflmao:

 

[S Phinney]

Those came from dirt entering through the intake. Most likely the filter. When I ran a Airaid Filter it looked worse than that by far. I will never run one again. I haven't had any issues like that running S&B Filter.

 

[SSchmi5519]

I run a sexy dry filter and mah blades are smooth as a sheeps butt. :baby:

 

[hondarider552]

Thats just wrong on so many levels.

 

[Rhall]

I ran my 4202 with 1/4" chunks missing out of a few blades, not good for balance, but still made the same boost.

 

[BLKLMM]

I run a sexy dry filter and mah blades are smooth as a sheeps butt. :baby:

don't let Mike L. See this

Thats just wrong on so many levels.

:thumb:

 

[dordtrecht5]

Just check for leaks on the intake, still doesnt look to bad to me.

LOL


I like tacos.

 

[gmduramax]

Nick stop using your intake as a vacuum for your 8===D

 

[LBZrcks]

Nick stop using your intake as a vacuum for your 8===D

:roflmao::rofl:

 

[whitetrash21]

Is Joe missing any screw drivers?:roflmao:

first thought through my head too .... i think he's using them on my intercooler boots now :rofl:

 

[TeaBagger2006]

Is Joe missing any screw drivers?:roflmao:

funny guy huh....:hug:

Those came from dirt entering through the intake. Most likely the filter. When I ran a Airaid Filter it looked worse than that by far. I will never run one again. I haven't had any issues like that running S&B Filter.

chit , my airaid filter let a damn screwdriver go through on mine.....WORST FILTERS EVER!

Nick stop using your intake as a vacuum for your 8===D

.........idk once you get some suction like that its hardto stop!

 

[blk smoke lb7]

funny guy huh....:hug:


chit , my airaid filter let a damn screwdriver go through on mine.....WORST FILTERS EVER!

.........idk once you get some suction like that its hardto stop!

:roflmao:

 

[towboattrash34]

I run a sexy dry filter and mah blades are smooth as a sheeps butt. :baby:

:dontknow::dontknow::dontknow:

 

[BLKLMM]

:roflmao: