Say, how'd yo ugo about dialing in your wastegate and what # did you end up setting it to? Thats on my list of to-do's before the next thrash session.
My racetruck project
- Thread starter Dudgy
- Start date
You know what, I set my Wastegate when my truck was apart for 2 months, I set it so it was pretty much all the way open when I put 35psi of air on the wastegate with my air compressor. And I've never touched it again since then. It hits 30-31 in the 1/4 mile
whats up with the torque numbers on the dyno?
nice runs btw
as for engine performance mods, mainly just built trans and tuning, boost tubes and wastegate?
nice runs btw
as for engine performance mods, mainly just built trans and tuning, boost tubes and wastegate?
Did you see a black newer dodge at the dyno event with widebody fenders and a lift and big tires? I bought some wheels off the guy (justin) and he said he was going to the dyno day. He just had the motor built and he claimed it was gonna make 1100hp, i couldn't make it to the event but i was wondering if it actually made the number
I ran a couple 12.22 runs and a 12.24 run on Sunday.
Very consistent, broke out in 2nd round eliminations. 12.22 on a 12.24 dial in
Here's two vids of mine, will upload the dyno vid tonight
http://www.youtube.com/watch?v=0oDxnwbwrec
http://www.youtube.com/watch?v=rFGlc8dzWKA
Very consistent, broke out in 2nd round eliminations. 12.22 on a 12.24 dial in
Here's two vids of mine, will upload the dyno vid tonight
http://www.youtube.com/watch?v=0oDxnwbwrec
http://www.youtube.com/watch?v=rFGlc8dzWKA
<iframe width="480" height="390" src="http://www.youtube.com/embed/EUx60sIcPWg" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/kaTkm0do1YY" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/8a3yA5t5EN4" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/rpeZVWtEsM8" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/ebeMIVwRIVQ" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/lwlD6XunKpk" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/kaTkm0do1YY" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/8a3yA5t5EN4" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/rpeZVWtEsM8" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/ebeMIVwRIVQ" frameborder="0" allowfullscreen></iframe>
<iframe width="480" height="390" src="http://www.youtube.com/embed/lwlD6XunKpk" frameborder="0" allowfullscreen></iframe>
Took the win in Calgary this weekend too in our Diesel class bracket racing. Truck is very very consistent and i'm finally cutting .0.. reaction times. .054 in the final, getting a lot better at the tree in my last couple runs. i'm gonna have to start building a trophy room lol:roflmao:
Last edited:
got offered a job 2 weeks on 2 weeks off down south (south texas). but i said f that shit haha
dude i'd love to have that schedule. right now i don't even know when i'm working and when i'm not. it keeps raining, worked 4 days in the past month. looks like it might dry up finally, hopefully get back to some steady work soon:thumb:
good, get back to work and send the rain this way. damn near the whole state is on fire....literally
Finally cleaned a little bit in the engine bay, doesn't look quite as ugly anymore with all the dirt. the motor itself is still dirty but that's a pain to clean so that will come when the engine gets pulled lol
And i built me a new intake box, should get a lot more air coming in this way than with the superscoop thru that small hole in the banks box.:thumb:
And some pics from Calgary last weekend, the rain started pouring down when we were on the return lane from the final run, timing was pretty good except we got soaked when loading the truck on the trailer haha.:roflmao:
And the towtruck wanted some attention too, pics from Mission BC
And i built me a new intake box, should get a lot more air coming in this way than with the superscoop thru that small hole in the banks box.:thumb:
And some pics from Calgary last weekend, the rain started pouring down when we were on the return lane from the final run, timing was pretty good except we got soaked when loading the truck on the trailer haha.:roflmao:
And the towtruck wanted some attention too, pics from Mission BC
