MTX preform crew cab box ?

[wikdlmm]

^^^X2 I have a couple L7's needing to be installed and I still want to lay my seat down for tools.

I agree with the Rockford Amps... especially (when i was into it - might be different now) - the Power series amps. Very clean sound whether mono block or 4 channel amps... In fact i have about 6 amps of varying power levels / models - all Rockford - sitting in my garage now.... mono amps are probably a bit too much for most 8's or 10's though, but several good Component / rear fill amps....

Maybe we swing a deal Trent??

Good luck with the L7 , that's what I have an it freakn rocks..

How much for one of those mono amps?

 

[LBZ]

Probably cost more to send them than they cost to make....
All 3/4 MDF, so they a tad on the heavy side.



Not sure if you're talking about laying the back of the seats down, or just latching the seat bottoms. I can latch the bottom of both seats. The protrusion on the top of the sub box sticks up into the seat bottom, but even when I sit on it, I cant feel the box through the seat. Thats saying something since I'm somewhere around 300 lbs.

I can get dimensions, I just dont have access to the truck right now though. Heres a few pics of puttin it together anyway.




How deep are the L7's?? This sub is about 6" deep so the opening had to be at least 6 1/2" to leave the back of the sub access to breathe. I dont think I could have gotten a deeper sub to work though.


Just so you all know, this is based on a subthump box. Reason I decided to do my own is I only run one 10, their box is set up for two. I also wanted to make sure my speaker would fit since its pretty deep.

Looks good Wes. Next time I am in Vegas I will have to get you to throw in your favorite Celine Dione disc and take it for a test drive!!:rofl:

 

[whitetrash21]

Right on!! Maybe blast some Hall and Oates while we're at it....

 

[LBZ]

Right on!! Maybe blast some Hall and Oates while we're at it....

What kind of homo are you? Hall and Oates.......:rofl:

 

[whitetrash21]

Michael Bolton?? Rod Stewart?? ...... Somethings gotta fit your funkadelic groove......

 

[LBZ]

I suppose we could rock out to Rod Stewart.....:rofl::gay:

 

[Big Block 88]

Probably cost more to send them than they cost to make....
All 3/4 MDF, so they a tad on the heavy side.


How deep are the L7's?? This sub is about 6" deep so the opening had to be at least 6 1/2" to leave the back of the sub access to breathe. I dont think I could have gotten a deeper sub to work though.


Just so you all know, this is based on a subthump box. Reason I decided to do my own is I only run one 10, their box is set up for two. I also wanted to make sure my speaker would fit since its pretty deep.

If you get a chance Wes I would like to get your deminsions on the box, the L7's are about 7-8 inches deep as there mag is huge, I have 2 of them but I only want 1 I'll prolly sell one or do some horse tradein with it, as they still are very $$$. Thanks man

 

[TIM Z]

If you get a chance Wes I would like to get your deminsions on the box, the L7's are about 7-8 inches deep as there mag is huge, I have 2 of them but I only want 1 I'll prolly sell one or do some horse tradein with it, as they still are very $$$. Thanks man

What size Jordan? Are they square right?

Been wantin one square solobaric 10 or one JL 10 for my truck.

Any body else HATE the design of our back seats?:baby:

 

[MadMaxx61]

What size Jordan? Are they square right?

Been wantin one square solobaric 10 or one JL 10 for my truck.

Any body else HATE the design of our back seats?:baby:

The LMM is worse. Stupid seats don't fold down only up so

 

[SIKDMAX]

I miss my thump thump thump

3 JL 10s

 

[BlackOpsDiesel]

www.supercrewsound.com they have some of the best boxes with the most air space and it gets better if you use polyfill...

 

[whitetrash21]

If you get a chance Wes I would like to get your deminsions on the box, the L7's are about 7-8 inches deep as there mag is huge, I have 2 of them but I only want 1 I'll prolly sell one or do some horse tradein with it, as they still are very $$$. Thanks man

Remind me next week. I'm leaving town shortly but I can get those for you once I get back

 

[Big Block 88]

:hug:Thanks Buddy

 

[WTF]

i have 2 kicker L5 8s under the seat with 1000 watts at 1ohm and the best part the speakers only take .5cf per speaker (sealed boxes of corse) for good sq and every body thinks i have 12s down there and behind the seat theres an amp rack

 

[Big Block 88]

Remind me next week. I'm leaving town shortly but I can get those for you once I get back

I'm reminding you now

 

[whitetrash21]

I'm reminding you now

This what I got so far. Need any more let me know. Fits the sub pictured with about a 1/2" left behind sub. Box is all 3/4" MDF, and all dimensions are outside edges.

 

[Big Block 88]

:hug:Hi Wes, how you doin

 

[whitetrash21]

:coolspot:

 

[Big Block 88]

:spit:

 

[fishv12]

I am sorry to resurrect an old thread but I noticed there is a dimension missing to Wes's plan and I was wondering if someone would be so kind to provide it to me. It doesn't specify how wide the box is at the subwoofer mounting plate. I imagine I can figure that out on my own but I thought it would be nice to have. Good job tho Wes and I really appreciate the plans! I am thinking of retrofitting it to fit my 12" sub which would also be half an inch deeper than yours. I don't really care if someone feels the box through the seat as I have someone sitting there only once in a blue moon.

Thanks in advance!