mounting fuel tank out front

[RichLMM]

I'd like to mount the fuel cell for my truck off the weight rack I just don't know where to put the lift pump and also what size lines to run? Garrick had the cell in the bed of my truck tied into the factory steel lines that go beside the trans should I run an? if so what size

 

[duramaxzak]

I mounted my fuel pump to the tube that mounts the weight box to the truck. I have -10AN (5/8") in and out of the pump and than split it into 2 -8AN (1/2") up on the motor that go to each CP3. The return line is -8AN.

View attachment 37440

 

[slipclutchms]

-10 is plenty

 

[RichLMM]

I mounted my fuel pump to the tube that mounts the weight box to the truck. I have -10AN (5/8") in and out of the pump and than split it into 2 -8AN (1/2") up on the motor that go to each CP3. The return line is -8AN.

View attachment 37440

i'd like to mount mine there but my truck sits super low in the front the filters would drag the ground loading up i'd think

 

[kjp800]

How about Mount a cylinder style cell up top and put the pump on the backside of the box. Not sure if there's enough room on yours there or not but it's an idea.

 

[pornstar dancin]

Why you want your fuel up front? Running it through the ice to cool?

 

[kjp800]

Why you want your fuel up front? Running it through the ice to cool?

Can't speak for him but my reason is to get more weight off the rear and up front

 

[pornstar dancin]

I just mounted mine in my bed because it was easy to install cell pump and lines. Figured it didn't weigh that much to worry about installing out front.

 

[RichLMM]

Why you want your fuel up front? Running it through the ice to cool?

just get more weight up front I run a fuel cooler now in the bed i'll prolly
mount it somewhere in line there

 

[05_LLY]

Rich. We run two pumps With 2, 1/2 lines(-8) pumps are mounted between the bumper and lower rad support.