Motor is coming out

[05LLY duramax]

Too bad you don't have a Lilly. I'm considering ditching my Profab for one of the full DHD y bridges and deletes

Ill buy the profab if you sell it

 

[TROJAN366]

Have another local buddy who wants it but if it falls through I'll let you know.

 

[05LLY duramax]

Have another local buddy who wants it but if it falls through I'll let you know.

Thanks :thumb:

 

[TROJAN366]

Want to point out I am very indecisive. Truck is being dropped off Sunday afternoon and I just made the decision to do Rods, Main Studs and delipped pistons. Just got too nervous that I'd do all this work and have it explode the second I flip it onto a hot tune. FML

 

[whitelmmmax]

You'll be glad you did it. I wish mine were done while it was out.

 

[Noreaster]

Want to point out I am very indecisive. Truck is being dropped off Sunday afternoon and I just made the decision to do Rods, Main Studs and delipped pistons. Just got too nervous that I'd do all this work and have it explode the second I flip it onto a hot tune. FML

after it blows up on the dyno?

 

[TROJAN366]

Not sure yet. I haven't made any changes since it put down the 540 on motor and 570 on w/m. Wouldn't be bad to have a baseline on Dez's but its $75 that I don't really need to spend.

 

[derek06]

Can always bump up the % if meth...

 

[blk smoke lb7]

Want to point out I am very indecisive. Truck is being dropped off Sunday afternoon and I just made the decision to do Rods, Main Studs and delipped pistons. Just got too nervous that I'd do all this work and have it explode the second I flip it onto a hot tune. FML

Money well spent :thumb:

 

[ryan415]

:thumb:

 

[TROJAN366]

Can always bump up the % if meth...

It'll be tougher to rebuild with a hole in the block lol

 

[TheBac]

Want to point out I am very indecisive. Truck is being dropped off Sunday afternoon and I just made the decision to do Rods, Main Studs and delipped pistons. Just got too nervous that I'd do all this work and have it explode the second I flip it onto a hot tune. FML

Smart man.

 

[TROJAN366]

Also going with an ati damper and a billet flex plate. O yeah. Blew my rear end. So a true trac will be making it's way in as well.

 

[RichLMM]

you' are a bad motherf*cker red bush

 

[JRODS*LB7]

:thumb::thumb:

Want to point out I am very indecisive. Truck is being dropped off Sunday afternoon and I just made the decision to do Rods, Main Studs and delipped pistons. Just got too nervous that I'd do all this work and have it explode the second I flip it onto a hot tune. FML

:thumb::thumb:

 

[TROJAN366]

you' are a bad motherf*cker red bush

When I come to pick up that intercooler I'll prove that isn't true:roflmao:

 

[derek06]

Ahh I wish I had a truck at the moment I need to get to Richards also to grab the smoke tube... But on the bright side you found out the rear was junk before putting more power to it and blowing it after the build and its down longer.

 

[TROJAN366]

Good point Derek. And I'm going down anyways. I could probably grab it for you.

 

[derek06]

If your taking a truck down there that would be great but if not ill have to get Doug to being me there, its too big to fit in the car I know that much

 

[sickdiesel]

You'll be happy your decided to build it for sure. like you said would have sucked to do alllll that work then go boom the first time you go to #5