Metal inside internal filter

[jason86]

Hey guys, I'm getting ready to ship my truck down to Inglewood transmission to get a fresh rebuild and I'm hoping Mike see's this pic for reference on possible damage. I pulled the internal filter apart and found chunky bits of metal and some pieces that look like snap rings or similar, any ideas what came apart? I know it's about impossible to tell from the pic but there is some knowledge in here. Trans started going into limp mode on every shift into 3rd gear, 1-2 work but you can tell there is something wrong when it warms up and it barely wants to move forward but it doesn't limp till the 2-3 shift. Reverse works just fine. Codes that pull up are P0700, P0747, and P0872.

 

[PureHybrid]

Those slivers look like PEEK material. Probably the ring gear or planetary thrust washers

 

[Mike L.]

Not good. Looks like gear train exploded.

 

[jason86]

Not good. Looks like gear train exploded.

Well we will find out soon, I spoke with you on the phone a few weeks back about getting it shipped down and installing my new turbo while its torn down. It's too bad I won't be there when it gets torn down to see the carnage. I'm just hoping it has enough left to pull onto the tow rig.

I'm expecting almost nothing to be reusable inside there but Mike and Evan are the experts.