LBZ: Main bolts

[x MadMAX DIESEL]

Is there a cut off date on the main bolts? Some have a zero on the head, some don't. I need to know which to pick up. I'm thinking I need the zero ones, but I don't have the motor here to check. This is an lbz. 6e216564 is the last eight if that tells anyone something.

Sent from my PC36100 using Tapatalk

 

[ripmf666]

The vin will not tell you. You will have to look at the ones that come out of yours.

 

[x MadMAX DIESEL]

Thats what I was thinking. Had the guy behind the counter get both shipped there just incase. Not that it matters, but are they different lengths or something? About the only reason I could see if they only have 1 part number for the stud kit.

 

[ripmf666]

Yes the ones with the o in the head are longer. And arp makes 2 main stud kits for the Dmax but most just use and stock the longer ones it does not hurt anything with studs.

 

[x MadMAX DIESEL]

Yes the ones with the o in the head are longer. And arp makes 2 main stud kits for the Dmax but most just use and stock the longer ones it does not hurt anything with studs.

That's the way I take it too. Thanks Henry, got to looking at mine and I do intact have 0 one them.

Sent from my PC36100 using Tapatalk

 

[x MadMAX DIESEL]

Also didn't get it because I know its the wrong balancer bolt, they had a bolt not much bigger diameter than the cam bolt but it was in a package that said 11680682??? Never before have I seen a bolt mismarked by GM, kinda odd . The old part number was 97329601, but I don't see how this bolt would work. It was a 6 point fwiw

 

[ripmf666]

Also didn't get it because I know its the wrong balancer bolt, they had a bolt not much bigger diameter than the cam bolt but it was in a package that said 11680682??? Never before have I seen a bolt mismarked by GM, kinda odd . The old part number was 97329601, but I don't see how this bolt would work. It was a 6 point fwiw

Just had this happen on the balancer bolt. In my last order they sent most of the 12 point the sent these darn 6 points with a little air plane on the bag and the cost was a lot less.

 

[x MadMAX DIESEL]

Just had this happen on the balancer bolt. In my last order they sent most of the 12 point the sent these darn 6 points with a little air plane on the bag and the cost was a lot less.

So is this the new bolt? If that's the case ill probably just use my old one. It looks cheaply made.

Sent from my PC36100 using Tapatalk