LB7: maf code

delong_1

<< my work
Dec 5, 2008
1,282
0
0
38
Arvada, CO
last night at the track i threw p0103 twice, when i put the turbo on i put that boost fooler that taps into the map sensor. is this causing the code?? after it set the light the first time i cleand the maf sensor but i set again. it has never thrown that light before so i wondered if the boost fooler was to blame. also do most even use the boost fooler?? i wondered if it was even necessary with efi live??

thanks for the help
 

LBZ

Super Moderator
Staff member
Jul 2, 2007
9,903
149
63
46
B.C.
I'm pretty sure you don't need the boost fooler if you have efi. You can pretty much command as much boost as your turbo can make with EFI. I would just remove it if I were you.
 

Kat

Wicked Witch of the West
Aug 2, 2006
17,899
13
38
60
Norco, CA
I'm pretty sure you don't need the boost fooler if you have efi. You can pretty much command as much boost as your turbo can make with EFI. I would just remove it if I were you.

With an LB7? I thought people still needed it. I know LLY though LMM people don't need it.
 

delong_1

<< my work
Dec 5, 2008
1,282
0
0
38
Arvada, CO
thanks that is what i was thinking i really didnt think that it was necessary but went ahead and put it on for whatever reason. could it be causing the code?
 

LBZ

Super Moderator
Staff member
Jul 2, 2007
9,903
149
63
46
B.C.
With an LB7? I thought people still needed it. I know LLY though LMM people don't need it.

If he has an aftermarket charger and EFI, wouldn't it be the same approach to tuning as say an 06 with an aftermarket non vvt turbo and EFI? Obviously the tables are different but you know what I mean.

Or am I messed up and should just go and stand in the corner?:buttkick:

:D:rofl:
 

sweetdiesel

That's better
Aug 6, 2006
10,390
0
0
52
Thailand
B0802 you could try increaseing or use a map and customize it to the turbo
b0806 maxed out?Might try adjusting b0201 B0801 maxed out?