lowered truck pics

408.Luke

408.Luke

Joined the DARKSIDE
Sep 19, 2009
432
0
0
Houston
olliepop2500 said:
I'm not 100% but I think they r 20x10s
Click to expand...

That's what I was thinking

Jetty LBZ said:
Josh what did u use to make yours and do u think 5/16 plate would be stout enough for a crossmember? Sorry to derail :eek:. Luke why the wheel change man those look beastly!
Click to expand...

Mickey no longer makes that good looking ATZ tire and I need new ones. I'll be keeping them and throwing on some terra grapplers for towing so they arnt gone forever. Also hoping to lose some weight with the 20's.

Lb7_Katie said:
Wheels are both 20x10 -24 offset with 4.5" of bs
egygusu2.jpg
ryhybabu.jpg
3erubyda.jpg
a3ahe8e8.jpg


And both running 305/50/20 nitto 420s

Sent from my iPhone using Tapatalk
Click to expand...

Both look amazing! But this sells me on a 9" wide wheel if they rub that bad.
 
408.Luke

408.Luke

Joined the DARKSIDE
Sep 19, 2009
432
0
0
Houston
olliepop2500 said:
I had 20x10-24 they looks great with how low u r u t goin to have to do some trimming
Click to expand...

I can do some trimming. Can i do enough to make them work though? Either way ill be running the same size tire so wouldn't i basically be in the same situation with the 20x9? I know its not quite the same thing due to the offsets and such but I've never been good about wheel sizes/fitment
 
Dirtymaxx07

Dirtymaxx07

New member
Jan 15, 2013
254
0
0
408.Luke said:
I'm about to order some wheels are tires and wanted to make sure my sizes are right. 20x9 wheels with a -12 offset. Tires will be 305-50-20 nitto 420's I'm going for something kinda like this but I think these are 20x10?
Click to expand...
Yeah those look like x10s.

I know you are wanting 20s. I'm running 22x9.5s and my tires rub pretty good on the front side of the fender well. I'm running 285/40s. I did a little trimming on the back side of the fenders to clear. So a 20x9 should be fine will little trimming. I think if you go any wider it will rub pretty bad.

I've kinda got used to mine, haha turning radius is a little shorter haha like Katie said.
 
Lb7_Katie

Lb7_Katie

Lb7 Duramax
Sep 8, 2013
851
31
28
34
FC5452 said:
It's gonna be killer going to Indy ?
Sorry for the derail :D
Click to expand...


Yes I'll for sure be running at Indy this year. TS is still up in the air I might have to go to meet up with diesel tech for some photos but idk if ill run it


Sent from my iPhone using Tapatalk
 
Lb7_Katie

Lb7_Katie

Lb7 Duramax
Sep 8, 2013
851
31
28
34
ryan415 said:
Great looking trucks! :thumb: Love that Chevy to death lol
Click to expand...


Thanks! It's my boyfriends truck...arp headstuds, 40%overs, Manifolds and up-pipes,Ported fuel rail fittings
PPE high flow CP3 kit, Fass 260
S475 over stock twin kit, Full EGR delete (3in y bridge), 3in intercooler pipes, EFI by Kory Willis, Calvin's Trans....


Sent from my iPhone using Tapatalk
 
JoshH

JoshH

Daggum farm truck
Staff member
Vendor/Sponsor
Feb 14, 2007
13,712
773
113
Texas!!!
Jetty LBZ said:
Josh what did u use to make yours and do u think 5/16 plate would be stout enough for a crossmember? Sorry to derail :eek:. Luke why the wheel change man those look beastly!
Click to expand...
It was so long ago that I made mine, I don't really remember for sure what I used, but I think it was 2x2 11 gauge square tubing. I couldn't say for sure if just some flat 5/16 plate would be strong enough.
 
Jetty LBZ

Jetty LBZ

work in progress
Jan 24, 2011
404
0
0
33
middle TN
JoshH said:
It was so long ago that I made mine, I don't really remember for sure what I used, but I think it was 2x2 11 gauge square tubing. I couldn't say for sure if just some flat 5/16 plate would be strong enough.
Click to expand...
Gotcha. well the need for one is a ways off so il have time to think up something. maybe weld angle iron on top to brace it? idk really, il just cross that bridge when i get there;)
 
SSM05

SSM05

New member
Jul 14, 2012
3
0
0
Where are y'all finding the 3" drop shackles? I'm having no luck finding a set for my LML. Thanks in advance.


Sent from my iPhone using Tapatalk
 
SSM05

SSM05

New member
Jul 14, 2012
3
0
0
I think I'm on to some now lol sorry to be a bother! Thanks tho!


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Top Bottom