Loud shrill sound after uppipe and manifiold install

[BUST'EM 504]

I just did my uppipes and manifolds now I have a loud sound coming from the drivers side. Any ideas?? I will try to get a video

 

[TheBac]

Leaking gasket. Look for signs of soot.

 

[bullfrogjohnson]

You have a leak from one of the gaskets. Check for loose bolts.

 

[BUST'EM 504]

I just retorqued everything on the manifold and lower uppipes didn't check the top ones yet. Should I have changed all the gaskets?

 

[paint94979]

I just retorqued everything on the manifold and lower uppipes didn't check the top ones yet. Should I have changed all the gaskets?

i would have i did not and my DS uppipe to pedestal pinched and leaked hurt me over 3mph in the 1/4 mile but i couldnt hear anything

 

[BUST'EM 504]

Well son of a bitch lol I am going to check tomorrow and see where it's coming from. Should I order stock gaskets again or does someone else offer them.

 

[paint94979]

Well son of a bitch lol I am going to check tomorrow and see where it's coming from. Should I order stock gaskets again or does someone else offer them.

Henry can set you up but you just might try and go to your local dealership

 

[BUST'EM 504]

Ok I will give the dealer a call thanks guys:thumb:

 

[paint94979]

here is the part # 97192618

 

[BUST'EM 504]

Thanks is that the exhaust manifold

 

[JD4440]

here is the part # 97192618

all 4 the same I'm guessing ?

 

[paint94979]

all 4 the same I'm guessing ?

no top 2 are the number i posted the manifold to up pipe is a different part #

 

[JoshH]

I've reused gaskets on several different trucks and never once had a problem because of it. I always use a torque wrench to tighten all the bolts to the proper torque spec though.

 

[paint94979]

I've reused gaskets on several different trucks and never once had a problem because of it. I always use a torque wrench to tighten all the bolts to the proper torque spec though.

I agree Josh I had reused my gaskets 3 times and on the 3rd time one pinched i have def. over tightened them just because getting back there is a giant PITA

 

[TheBac]

I've reused gaskets on several different trucks and never once had a problem because of it. I always use a torque wrench to tighten all the bolts to the proper torque spec though.

Same here.

 

[BUST'EM 504]

This is the third time they had to come off I torqued everything to the specs. Sounds like its coming from the drivers side. I really dont want to pull all this shit apart again though

 

[ripmf666]

I have had mine on and off many times. There the only part that I never tq. But I do keep the manifold to up pipe gaskets and up pipe to turbo and the manifold gaskets in stock.

 

[emiller3]

Any signs of soot on anything

 

[BUST'EM 504]

I am going to drive it home this evening and check for soot. Everett its all your fault man :roflmao:
Henry can you pm a price on all three Thanks

 

[emiller3]

:rofl: