LLY: Loading Any Tune - No Start

RobsDmax

RobsDmax

Member
Mar 19, 2012
832
1
16
Arthur, Ontario
Hi everyone,

Figured i would try and get some opinions, i have a friend with a lly and he ordered efi tunes from rob at atp, basically long story short we have been trying from about 9 tonight till now with no results. I have tried to flash in stock tune, and his new dsp5 tune neither work. he drove the truck to my place, i plugged in laptop and have had error messages. i have updated all software and firmware. now the truck will not start at all, we pulled fuses and also tried boosting batteries. here is what i get while flashing

Executing: C:\Program Files\EFILive\V8\Config\E60_F.obj
Virtual Machine Started
Script Loaded
Script Verified
Executing: Boot Loader...
Please: Wait...
Script exited with code $0101: No data received

To say the least we are stumped and hope we haven't blown ecm. Any input would be great truck is at my house not running. :(:(:(:(:confused:
 
B

Blackhawk878

Member
Jan 16, 2012
100
0
16
Grovetown, GA
That only happens to me when I park in the middle of the driveway. Like RPM said, I disconnect the batteries for a while and ground the positive cables to the neg terminal to clear any lingering voltage. Works and I am able to get through the sequence again. Done this about five times now. Seems to be voltage changes that cause it, e.g. me forgetting to unplug or power something off.
 
GMC_2002_Dmax

GMC_2002_Dmax

The Still Master
Feb 15, 2008
1,748
8
38
55
Charleston, SC
www.ridgerunnerdieselperformance.com
RobsDmax said:
Hi everyone,

Figured i would try and get some opinions, i have a friend with a lly and he ordered efi tunes from rob at atp, basically long story short we have been trying from about 9 tonight till now with no results. I have tried to flash in stock tune, and his new dsp5 tune neither work. he drove the truck to my place, i plugged in laptop and have had error messages. i have updated all software and firmware. now the truck will not start at all, we pulled fuses and also tried boosting batteries. here is what i get while flashing

Executing: C:\Program Files\EFILive\V8\Config\E60_F.obj
Virtual Machine Started
Script Loaded
Script Verified
Executing: Boot Loader...
Please: Wait...
Script exited with code $0101: No data received

To say the least we are stumped and hope we haven't blown ecm. Any input would be great truck is at my house not running. :(:(:(:(:confused:
Click to expand...

Make sure you have the latest May 10th release and installed as well as the updated firmware for your V2.

I tested the new version 206 as well as the firmware for EFI-Live earlier this week and I did not have any issues with the LLY flash.

Good Luck
 
Fastorange

Fastorange

New member
Jan 31, 2009
256
0
0
ohio
What fuses are you pulling... lly's can be a pain sometimes... there are 4 that i have to pull to flash mine.... i have them marked so if ya need me to go out and look let me know
 
RobsDmax

RobsDmax

Member
Mar 19, 2012
832
1
16
Arthur, Ontario
Blackhawk878 said:
That only happens to me when I park in the middle of the driveway. Like RPM said, I disconnect the batteries for a while and ground the positive cables to the neg terminal to clear any lingering voltage. Works and I am able to get through the sequence again. Done this about five times now. Seems to be voltage changes that cause it, e.g. me forgetting to unplug or power something off.
Click to expand...

haha it was parked behind two trucks, so we pushed it out of the way, and ok i am gonna try this now!! thanks
 
RobsDmax

RobsDmax

Member
Mar 19, 2012
832
1
16
Arthur, Ontario
GMC_2002_Dmax said:
Make sure you have the latest May 10th release and installed as well as the updated firmware for your V2.

I tested the new version 206 as well as the firmware for EFI-Live earlier this week and I did not have any issues with the LLY flash.

Good Luck
Click to expand...

pretty sure i am updated but gonna actually delete software, then re add onto computer to be sure
 
A_T_Ver

A_T_Ver

Member
Jul 31, 2007
416
0
16
So if i'm up to date. My my firmware says version 2.07.29 may 11 2012, and bootblock is version 2.07.04 dec 12 2011. Is that right?
 
T

TRUBBS

Member
Jul 6, 2011
461
0
16
I can't get mine either, keeps saying boot loader fail, returned back to normal operation. Tried door open, radio fuse out, un hooked batteries and all. What to do next?
 
You must log in or register to reply here.
Top Bottom