Lmmlbz twin kit say 475/stock if I got just piping what would have to be done to get it to fit a 366 and throw in a 483
Lmm twin kit
- Thread starter blue09dmaxx
- Start date
I could be completely wrong but I don't think the piping kit would work at all seeing as the intake would be completely different since the s483 would be going into a s366 not a stock inlet... As well as the exhaust side being a different downpipe setup because again going into a bigger s366 exhaust side vs a stocker...
^true but going off he already has the s366 on his truck should be able to reuse the 1 on his current setup?
I did't know a s366 was a big spinny thing. sorry, yes, you will be able to retain your current pipe then. You worded it as if you were buying or had bought a stock twins kit. The downpipe will likely not take much modification, but the hotpipe will be different, as well as the charge pipe.
On the 300/400 kits we typically also build an LB7 top inlet bridge, vs the front inlet bridge that you'll have on a basic stock/475 kit. Allows more room for charge pipe between the chargers and easier to install also.
I have a 366/483.. Hot pipe I'm trying to sell if your interested. Nathan has it right now. I went with a bigger setup and can't use the old one. I was selling it to a guy on here but I have not seen payment and have not heard from him in a few weeks. You would have to have your wastegate stuff plumbed in though. Pm me if you'd like pics of it.