LMM: lmm stock turbo modd

[Mpsoldier]

ok guys i am a guy that liks to build everything myself idk why just do. so picking up my newly used lmm on monday and thinking of the build for the truck have everything worked out but the turbos. i am going to either use a s480 or s475 with batmowheel. but for the stocker what mods can you do to it for more flow? batmowheel? something equal to dansville stg1 or 2. just there not open tonight and work is dragging so figured to see if anyone knew.

 

[emiller3]

I don't think a stock batmo would help flow . Now a larger one should help.

 

[paint94979]

I don't think a stock batmo would help flow . Now a larger one should help.

http://www.duramaxdiesels.com/forum/showthread.php?t=34006

 

[Mpsoldier]

how large of a wheel will fit i could figure it out but figured to ask. also what else is involved port and polish?

 

[paint94979]

how large of a wheel will fit i could figure it out but figured to ask. also what else is involved port and polish?

IMHO guys for years have been trying to mod at home a stock Garrett VVT turbo, and the gains vs. time/cost was not really close. The only way to really increase flow a drastic percentage would be to go with a Fleece(vendor) or a similar modded stock turbo. Garrett also makes a direct drop in VVT named the GT4094VNT. FYI guys have been running 11's (650hp+) on a standard compound turbo kit using an S480. It is your truck and it is definitely up to you just figured I would give a little info

 

[Mpsoldier]

yea i know i have a 2002 lb7 twins 701hp fun truck but never did anything with stock on it other than that keeping everything the same but on the lmm just figured to look into some info on the lmm stock turbo, get some ideas thats all.