LMM Black Box Logging

[JoshH]

I haven't had the chance to play with BBL on an LMM before, but I have been trying it recently and can't get it to work. I select the PIDs, then when I go into the datalogging section and select record or display data, it says "No PIDS Selected" or something like that. Has anyone else had any luck with this on the LMM?

 

[Cougar281]

What firmware ar you running? Try the attached options.txt. It should give you balance rates and Transmission TFT and gear.

 

[JoshH]

I updated my firmware and bootblock and the black box logging is working now. The only problem is there are a few PIDs that don't display on the black box. They log just fine, but they show 0 on the display. They are BOOST2_M, MAIN1Q_M, and MAIN1T_M. Anyone know what's up with that?

 

[Cougar281]

Might be a bug...

 

[MMLMM]

Some dont work right, some do. Edit your options text file and change the PIDs to what you want and for you truck, you can get rid of all the gasser ones too.



on that note.

I have a PIDs list saved in the V2 and IAT 2 reads 100° more than it really is, yet in another PID list it is fine....

It uses the same conversion to convert to °F so thats wierd....

 

[JoshH]

I did that already, Mike. The strange thing is the value in those 3 PIDs listed in my second post show up just fine in the log when I put it on my computer, but they all show 0 when I look at them on the box.

 

[MMLMM]

I did that already, Mike. The strange thing is the value in those 3 PIDs listed in my second post show up just fine in the log when I put it on my computer, but they all show 0 when I look at them on the box.

do they need to have a conversion in the options file?

That is kinda odd.