Lly build what parts would you use?

[Badheartbull]

I am buying new engine part off a guy. Just wondering what part you would use, sell or replace with a different part or add.
Here the list

Carrillo rods
Mahle forged race Pistons
SoCal flex plate
SoCal super damper
Ppe fuel rails
Banks intercooler
Bearings
Arp headstuds and bolts
SoCal 6480 cam
SoCal billet crankshaft



Truck is daily driver.
I have a bmw s472 and a built transmission with robs tunes

 

[Badheartbull]

Not looking to get crazy but would like to be in the 750 hp range

 

[TheBac]

I personally think you've done a good job already. You'll want to address the fuel system, though. 100% overs and a good CP3 would certainly help you.

 

[x MadMAX DIESEL]

What's the deal with PPE fuel rails?


Sent from my iPhone using Tapatalk

 

[duramaxzak]

For a daily driver I would go with cast pistons and also a AF cam.

 

[x MadMAX DIESEL]

For a daily driver I would go with cast pistons and also a AF cam.

Me too I would sell those pistons and use delipped Llys


Sent from my iPhone using Tapatalk

 

[mike diesel]

Forged are not a good option for a daily driver.

 

[Badheartbull]

I was thinking that on the Pistons. They were what the other guy had

 

[Badheartbull]

What about the crank would you use or sell and use a stock one

 

[andy-stevenson]

Is the crank stock stroke or is it one of Guy's 7.1L stroker cranks?

 

[Badheartbull]

Stock I think

 

[andy-stevenson]

These are just individual parts or is the motor assembled?

 

[Badheartbull]

They are new in boxes. He has had them for a couple years. Selling to me as a package deal

 

[andy-stevenson]

Like everyone else has said, finger's pistons or delipped lb7s, if the truck is a daily driver. Alternate firing camshaft.

I'd also add a set of ARP main studs, valve springs, pushrods.

I'd find out about the crankshaft and whether it's stock or stroker and find out what kind of bearings.

 

[Badheartbull]

Ok on the Pistons. Think there are springs and main studs. Why the alt firing cam?

 

[Badheartbull]

What are good pushrods to get

 

[TeaBagger2006]

SoCal pushrods. The AF cams have shown promising results when it comes to crank failures. I don't think it's something to worry about with the billet crank and the hp range you're shooting for.

 

[blue09dmaxx]

I've got a motor complete for sale you'll just have to
Change relluctor wheel