Little turbo

[03 D-max]

854 cc (24.6 hp) liquid cooled, 3-cylinder , 4-cycle Yanmar diesel engine

what do you think i could get for a turbo for this thing. It needs more powa!! adding fuel is no prob

 

[Whitetail Addict]

Yanmar...John Deere?

 

[03 D-max]

yup a new JD gator XUV

BTW 23:1 compression ratio

 

[Whitetail Addict]

A turbo gator would be cool...especially out at Schieds. Might want to try a charger off a 4bt, it would be a Holset but not sure of the number.

Sorry, I don't know much about chargers...just my truck has one and it makes a whoosh sound

 

[eds04max]

Would a take-off from a Volvo gas-burner be too big?????

 

[03 D-max]

A turbo gator would be cool...especially out at Schieds. Might want to try a charger off a 4bt, it would be a Holset but not sure of the number.

Sorry, I don't know much about chargers...just my truck has one and it makes a whoosh sound

HAh thats about how much i know about turbos too lol

hoping to get this thing to go like one SOB :coolspot:

 

[05' Ditry Duramax]

Would a take-off from a Volvo gas-burner be too big?????

I was thinking the same thing. My Saab has a tiny little thing on it. I think my wifes hair dryer puts out more air than that little turbo does. Maybe you can call a few junk yards or do a search for those gas pot turbos off some of the saab, volvo, audi's ect.....

 

[03 D-max]

Would a take-off from a Volvo gas-burner be too big?????

not sure if i could get it to spool. she only winds to 3600

 

[03 D-max]

I was thinking the same thing. My Saab has a tiny little thing on it. I think my wifes hair dryer puts out more air than that little turbo does. Maybe you can call a few junk yards or do a search for those gas pot turbos off some of the saab, volvo, audi's ect.....

searchin right now. turns out there not as big as i thought

 

[03 D-max]

these saabs and volvos only run like gt17's and i think that would be just about perfect

The next rainy day i get i will head to our local junk yard and search the lot :Charger:

 

[05' Ditry Duramax]

searchin right now. turns out there not as big as i thought

The one on my car spools almost instant but it's also got 2.3 L pushing it too. It's kinda impressive when it comes on. You can actually feel it on the ol' butt dyno.

 

[mytmousemalibu]

JD had a tiny S200 on some stuff, even had a Deere cast into the housing Prolly be perfect. Check Ebay.

Id also look for a diesel Smart car turbo on there.

Its gonna need a tiny hairdryer too spool up! a Gasser one might be hard to get goin.

 

[03 D-max]

JD had a tiny S200 on some stuff, even had a Deere cast into the housing Prolly be perfect. Check Ebay.

Id also look for a diesel Smart car turbo on there.

Its gonna need a tiny hairdryer too spool up! a Gasser one might be hard to get goin.

Yah i have been looking at turbo maps and i dont know if i could get a gasser turbo to spool.

but i will defiantly keep an eye on ebay

 

[maxaholic]

I've heard some people putting turbos on the Kubota RTV. I don't know if it is a kit or what size it is. But you might look into them.

 

[racinmike77]

A gt 12 is plenty big you should be able to make plenty of power with it. When looking at compressor maps multiply lb/min by 10 and it will be close to the hp output. As for pressure ratio 1= 15psi boost 2-30psi 3=45psi at STP. So at a PR of 2 roughly 30psi a G12 in its map will be pushing a motor to 50-100hp, I honestly dont think you will have enough fueling and dislacement to push a GT12 to 30psi. For you application you will definately want something small that spools quick and you should invest in a wastegate.