Leveling a 2011 GMC Denali

[jwtutiii]

I would like to level my truck. I keep seeing that i need a special torsion bar key tool.
The tool is as much as the kit.
Is the tool for a 2011 different then other years?

Thanks

 

[hondarider552]

The tool should be like a 18mm socket...

 

[coker6303]

I believe you can just use a basic 2 jaw puller if you are installing lift keys. Raising stock keys is just a ratchet and socket like hondarider said above.

It's going to ride like a brick with the stock keys all the way up and even worse if you crank the lift keys up. Either way you are applying a lot of version force to lift the front making it stiff.

What about the cognito arms? Maybe someone can give you a better route than the lift keys.

I would not recommend lift keys!

---------------------------------
08 LMM Chevy CCSB
Relentless Diesel trans
JoshH EfiLive tuning
554hp 1014ft-lbs 7/30/11

 

[coker6303]

Little more expensive but much better than lift keys or jacked up stock keys.

http://www.cognitomotorsports.com/p..._Kits_-_Upper_Control_Arm_-_2011_GM_8lug.html

---------------------------------
08 LMM Chevy CCSB
Relentless Diesel trans
JoshH EfiLive tuning
554hp 1014ft-lbs 7/30/11