alright i just put a s366 s480 twin kit on my truck and am told that i need a built motor asap which i figured but my questions are what rod,piston and other parts are going to be needed. i am at a complete loss here. need help!!!
lbz motor build questions
- Thread starter Dbucholtz55
- Start date
from my understanding that turbo set up will be around 700 on the small end but like i said I'm at a loss
Nonsense. You can have a tune that barely makes stock power levels with that setup.
I had MPI twin kit 66/880 and my small tune made 380rwhp. All on tuning you don't need a built motor, yet.
Sure...
If you also added those Exergy 60 over injectors and 10mm CP3 that are in your sig at the same time as the twin kit and didn't change the tune at all...
That set up is pretty much a towing twin kit, it's slightly bigger than a true towing twin set up but not an all out race kit. It'll make a ton of power if you want it to but it can also be tuned to make stock power output
I'd suggest contacting a few tuners or your preferred tuner and hashing out what you're looking to accomplish and get a proper tune "ASAP" that's what you need, not a built engine...yet
Good luck
Cheers
I say if you have the money go for it! What's the fun in having an 800hp setup tuned to 600hp? I think the post below is a great starting point for a very tough DD motor. Obviously there is a lot more a guy could do but that would keep you from the failures you're being warned about.
I think it comes down to: DO YOU NEED BUILT MOTOR NO, DO YOU WANT A BIULT MOTOR HELL YAHHHH:roflmao: