lbz lowered with airbags

[sparepartsracing]

are there any companies that make air bags for lowered truck with goosenecks? or anyone done this before? i don't want full air suspension.

 

[Novak]

Tyler at SDP hooked my friend up and his is lowered 3 inches and the overload spring is removed and and Tyler at screaming diesel hooked him up.


Sent from my iPhone using Tapatalk

 

[LBZ1991]

I don't think there is a kit that will work with it lowered. I build a set of mounts for my truck as it has 3in shackle with the overload removed. I'll see if I can get some pics

 

[OregonDMAX]

The bag will have to be mounted outside the frame rail instead of under it. Kits for a 1500 that mounts on the outside of the frame is all you will find that is bolt on but won't be the same as what is offered for a 2500

 

[Awenta]

The bag will have to be mounted outside the frame rail instead of under it. Kits for a 1500 that mounts on the outside of the frame is all you will find that is bolt on but won't be the same as what is offered for a 2500

The ford bags Mount like that. Shouldn't be too hard to retrofit


Sent from my iPhone using Tapatalk

 

[Chad006]

Built this for mine, it's on two leaves now not sure how much lower than stock. Works good for what I do.

 

[sparepartsracing]

yeah i was hoping for any easy way out but, doesn't look like its going to happen. Thanks for the info everyone

 

[clrussell]

Get a kit for an 99-02 dodge 3500.. have to drill holes but it'll work. As long as your wheels have stock offset at least..

I ran a set on my lowered Zf6

 

[sparepartsracing]

Problem is the gooseneck setup is in the way


Sent from my iPhone using Tapatalk

 

[Awenta]

Problem is the gooseneck setup is in the way


Sent from my iPhone using Tapatalk

Make some brackets to match those bolts


Sent from my iPhone using Tapatalk

 

[Chad006]

The ones that lbz1991 built would most likely work with a fifth wheel.

 

[LBZ1991]

Mine mount off the rear of the axle. Still requires welding and drilling but clears the bed hitch and my 5in exhaust. Think I have some extra brackets if you're intrested

 

[sixsixkid1]

There is a company called Timbren that makes a HD rubber bump stop for towing, I talked to them on the phone awhile back and they told me they didn't make a kit for lowered trucks but I could pull measurements and they could make something work. If you don't have to have airbags it's another option.

 

[bigmackmiller]

Doesn't air lift make a kit for lowered trucks?


Sent from my iPhone using Tapatalk

 

[clrussell]

Mine mount off the rear of the axle. Still requires welding and drilling but clears the bed hitch and my 5in exhaust. Think I have some extra brackets if you're intrested

These are exactly what he needs.

I have a set I've never installed

 

[sparepartsracing]

Mine mount off the rear of the axle. Still requires welding and drilling but clears the bed hitch and my 5in exhaust. Think I have some extra brackets if you're intrested

Yes. Definitely interested.


Sent from my iPhone using Tapatalk

 

[sparepartsracing]

There is a company called Timbren that makes a HD rubber bump stop for towing, I talked to them on the phone awhile back and they told me they didn't make a kit for lowered trucks but I could pull measurements and they could make something work. If you don't have to have airbags it's another option.

I think that would be a really rough ride tho

 

[Awenta]

How heavy are you towing? Too much for air shocks?


Sent from my iPhone using Tapatalk

 

[sparepartsracing]

Have a 40' gooseneck toyhauler with a 5600lb buggy in. Probably 20k total


Sent from my iPhone using Tapatalk

 

[05chevy]

This is a pic while i was building mine. Used 2 truck bags to support what ever weight i wanted. Have DJM lower control arms. Truck front x member is about 4" off the ground.

Sent from my SM-G930P using Tapatalk