LBZ: LBZ CP3 Removal Help

[AZBio]

Does the Y-bridge have to come out to remove the cp3?

 

[MD-Dmax]

Yes it is the easiest way

 

[AZBio]

Damn. It doesn't look too easy to get it out.

 

[AZBio]

Yes it is the easiest way

How do you get to the lower rear bolts without removing the turbo?

 

[MD-Dmax]

A small ratchet wrench or a swivel socket and a extension. You don't have to take the bottom bolts all the way out either the y bridge has slots on the bottom side loosen them up a little and pull it out

 

[emiller3]

Swivel socket 1/4" drive works

 

[PAT]

X's 2 on the swivel and extension. Be carefull pulling the socket/swivel out though. I lost my socket in the valley when I pulled the tool out lol. I found it a while later when I pulled tue stock turbo.

 

[rgullett83]

If you have torxbits for a 1/4" drive, you can take the lift pump off of the back of the cp3 to get it out, least ways thats how I do it.:thumb:

 

[jraymer]

If you have torxbits for a 1/4" drive, you can take the lift pump off of the back of the cp3 to get it out, least ways thats how I do it.:thumb:

x2

 

[AZBio]

Thanks guys.:thumb: Went the y-bridge route. Just trying to get it all buttoned up again.