I know a few guys here in RI that will want them......keep the LB7 stuff coming.:thumb:
LB7: LB7 Down Pipe !
- Thread starter TrentNell
- Start date
I know a few guys here in RI that will want them......keep the LB7 stuff coming.:thumb:
Dimitri has my white truck , I need to get it back so i can install it :hug: I will have it on for shure by the end of the week .
As Henry said Rick hasn't let us know on prices yet. When Trent gets it on the truck and tested Rick will move on to public release and will let us know the prices which will be posted up on our sites.
Got the down pipe on today , well 20 minutes ago to be excact 
, i can say i was sceptical on gains , but so far the SOT meter say 20-25 hp . This is on a stock tune truck also with no fuel added to it . I def say its is worth the effort spool up seems to be improved , it takes less throttle to get the truck moving , and with 35" tall tires and 20" wheel it is a added bonus in that dept, and the power feels to be increased the same through the RPM range . I didnt take any pics because i was in a hurry but fitment was good and bolted right up like the stock peice . I dont have an EGT gage in that truck because of stock tune, but i would have to think the EGT's would be better after such a flow increase . If anyone has questions let me know .
, i can say i was sceptical on gains , but so far the SOT meter say 20-25 hp . This is on a stock tune truck also with no fuel added to it . I def say its is worth the effort spool up seems to be improved , it takes less throttle to get the truck moving , and with 35" tall tires and 20" wheel it is a added bonus in that dept, and the power feels to be increased the same through the RPM range . I didnt take any pics because i was in a hurry but fitment was good and bolted right up like the stock peice . I dont have an EGT gage in that truck because of stock tune, but i would have to think the EGT's would be better after such a flow increase . If anyone has questions let me know .
Last edited:
I think in the range of 350.00 or so but i would check with the vendors to be sure .
Got the down pipe on today , well 20 minutes ago to be excact
Interesting news. Makes me wish my pipe would've worked. Ah well, can always try again.
I am curious, though...wouldnt the downpipe/frontpipe Vband connection now be a major restriction? Seems that it would be, since it necks down pretty severe from 3.5", then back out to 4" in teh exhaust.
Last edited:
It would be pretty easy to get rid of that v-band if some one wanted too , my DP was 3" so it didnt neck down much at all .
Rick wanted to make sure that A. they fit OK and B. that there would be gains from the part , so after what i seen today he is going to start building them .
If Rick is going to make 3" downpipes the Vband is OK but a 3.5" needs to bend to the front pipe.
Not sure what you meen ? they are in production and I think there are several already built ready to go .
This is where you can find these if anyone is still interested coming right off of Ricks website.
Last edited by a moderator:
