Intake Horn Problem

[JoshH]

It's possible that you popped the bottom of that out of the bridge when you installed the twins. I would try putting it back together and see if it holds up before I started modding stuff.

 

[ripmf666]

Henry, Could you not run the intake over the drivers side? Or turn the turbo 90deg, with the comp side toward the drivers side?

we were short of time and thats all the 90's they had in 5" lol we had room to run it towards the hood and along the top of the egr delete but not bends to work with lol. I wounder if the egr kit I have on my truck now would clear the mpi kit?

 

[Iceman56]

Well that didn't F*cking work!

Put it back together went out on the street and got on it and blew the o-rings out again

For some reason I can get it in the Y bridge real tight but then when I go to tighten down the MPI intercooler pipe down on the the EGR it pulls the fricken mouthpiece out of the Y bridge a bit. It's like the bracket on the IC tube is made wrong or at the wrong angle. This is my problem don't know how I am gonna fix it.