I know Industrial Injection has a bad reputation around here, and I have never been a fan of their products. However, it seems they have been working hard to turn around their image in be past few years, and it is difficult to ignore the success they’ve had with a lot of the trucks coming out of their shop. That said, I’ve been looking around and considering upgrading to a 14mm CP3, and I came across their XP CP3. They claim it is the highest flowing pump on the market. It is only a 12mm pump, but they have bored out the plunger to 8.5mm (up from the stock 7.5mm). If you do the math, that is a 10% increase in displacement vs a 14mm pump with stock size plunger bore. So, does anyone have any experience with this pump or any of the newer pumps they put out? It is tempting to try, but I’m having a hard time letting go of the tried and true 12mm Exergy pump.
Industrial Injection XP CP3
- Thread starter JoshH
- Start date
I've been itching to try one myself but my old school II pump refuses to give up the ghost. I bought it new in 2010 and it's been on multiple engine builds. I'm also eager to hear feedback on these.
Ordered a new XP pump and should have it by the end of the week. Once I have it dialed in and some baseline I will post up my take on it.
Staying with the 200% over. They are overkill for what I do with the truck now but they are still like new so no reason to change.
The pumps are on back order (similar response when I called to ask about them last fall). So I'm staying with what's on the truck.