Industrial Injection dyno day

[TrentNell]

what about the 7.3l power stroke that did 727hp?

you are 100% correct , he had a very impressive truck , he did 608 fuel and sprayed to 727 . His truck is a very good example of the tight #'s , he ran 11.6 fuel only @ rmr the night before and only dynoed 608 fuel . So he was 100 hp short of what the track showed .

 

[NWTDIESEL]

Trent, you going to Weekend on the Edge Sept 4th & 5th? Im going to try to make it...Lancaster pulls are Aug 29th out in Cali and i was going to try to make that one too. I need to make up my mind on one or take 10 days try to go to both.

 

[RodZZilla]

Congrats

 

[Dan@PPE]

Congrtas Trent!

 

[03-GMC]

the dyno results were

Trent Nell ( duramax) 1st place "twin class" fuel only with 719 hp uncorrected

Hector with custom auto( duramax) 1st place "unlimited" with 780 hp uncorrected

Tom Hansen (cummins) "single turbo" class 604 hp uncorrected

6.4 ford won the stock class not sure on the # though .

the dyno was very tight with #'s........ I through the kitchen sink at it to get my 719, I ran with the dual fuelers and had enough pulse to drain the rail down to 24500 , it should have been in the 8's by guesing how far off the other trucks were , and the custom auto truck is usally in the 9's and he had spray it to get the 780 .
I felt pretty good that the custom auto truck only put 60 hp on me , even though the overall #'s were low , I guess I wont really know untill Boise . I cant wait to try the injectors with a single CP3 , it is going to be interesting :driving:

__________________

The 6.4 did 510 if i remember right and 668 on juice.

I ran 398 and 414 w/ water meth.

 

[jmoore]

Way to go Trent. Congrats!!!:coolspot:

 

[S Phinney]

what it ran at the track friday night on a small tune proved to be 700 hp just from trap speed, I dyno'ed with 800 more pulse width ( and yes rail pressure held) I think that pretty well sums it up

What did it run Trent. Was it a new best?

 

[JoshH]

Congrats Trent! :hi5:

 

[TrentNell]

trent, you going to weekend on the edge sept 4th & 5th? Im going to try to make it...lancaster pulls are aug 29th out in cali and i was going to try to make that one too. I need to make up my mind on one or take 10 days try to go to both.

i will be there, not sure i am going to dyno though, but the track is for sure .

what did it run trent. Was it a new best?

nope i was running it soft , with the mph i was seeing..... If the map sensor wasnt acting up it could have been , but it wouldnt have counted for much with the dual cp3 installed .

 

[NWTDIESEL]

i will be there, not sure i am going to dyno though, but the track is for sure .



nope i was running it soft , with the mph i was seeing..... If the map sensor wasnt acting up it could have been , but it wouldnt have counted for much with the dual cp3 installed .

Ok, ill see you there most likely.

Congrats!

 

[TrentNell]

also for those wondering the corrected # on my run was 83* , dont remember the exact # , I personally dont care much about corrected #'s but i have had a few people ask me what they were .

 

[maine04max]

Congrats Trent :coolspot: I dont know alot about dyno's .... so whats it mean corrected??? is there a formula they use ??? and what exactly are they correcting?

 

[TIM Z]

Awesome Trent, I could only wish for those numbers someday!

 

[TrentNell]

Congrats Trent :coolspot: I dont know alot about dyno's .... so whats it mean corrected??? is there a formula they use ??? and what exactly are they correcting?

supposedly its is supposed to be what it would have dynoed at sea level . have no clue how accurate the corrections are .

 

[JoshH]

How did II enjoy you winning your class at their dyno?

 

[TrentNell]

dont have videos but i am trying too find some on the web , here is one of a twinned dodge .

[YOUTUBE]oQvHYooIcTU[/YOUTUBE]

 

[TheBac]

Congrats Trent!

 

[camomax]

Congrats Trent!! Great #'s man! Your hard a$$ work continues to pay off!

 

[wrcknkrw]

congrats trent.

 

[coldLBZ]

Congrats Trent