HSP Diesel 15% OFF Everything Sale!
With the launch of our new site, we are running an introductory sale to help get out products out there and on your trucks! :thumb:
Sale will run from NOW through July 31, 2013.
Take 15% off anything and everything on our website during this sale!
To take advantage, simply use coupon code: DuramaxDiesels at checkout!
www.HSPDiesel.com
Here are some of our products! Any questions feel free to ask!
Also, all orders will be shipped with an additional coupon to save 10% on a future order as well! :woott:
Exhaust
Downpipes - We offer a full line of high flowing downpipes for the LB7 (both emissions) through the LML.
Exhaust Manifolds - We have a few options for custom manifolds! Our manifolds are made from very high strength .120 wall Stainless Steel to prevent cracking or warping under high heat. You can also see the custom cut extra thick flanges we use! We offer these in both 2.00" as well as 2.25" versions!
Up-Pipes - We offer a direct bolt up, high flowing, super strong up-pipe for our manifolds in 2.00" or 2.25" to mate up to the pedestal, as well as offering a factory replacement up-pipe! We also sell them as a combo with our manifolds and up-pipes together for a great exhaust combination!
Pedestals - For pedestals we have to offer our billet design that will rival any product in the market for flow, quality, and strength. Our Billet pedestal is just that, cut out of Billet in a 2-piece design that allows us to keep the pedestal divided all the way through the entire pedestal into the divided T6 turbo flange.
We also offer a fabricated pedestal for those interested in that style. Both pedestals accept our manifolds and up-pipes as well as allow you to run a T6 charger in the valley!
Air Intake
High Flow Air Intake Tubes - For all years
High Flow Bridges - For all years, and our new flange design will outflow anything on the market!
Hot Side Tubes - For all years
Intake Manifolds
Billet 2-piece - Increasing plenum volume by 4-times, this intake manifold will give you the best performance of anything on the market. Cut in a 2-piece design from Billet, extensive design and flow testing have gone into this manifold! Custom high-pressure fuel lines also available direct through us!
A2W - Our custom fabricated sheet metal intake manifolds use only the best Bell cores, coupled with simply amazing welding and design to give you one awesome unit. These units are built per order and can be customized to suit. We have some a dual plenum design that was built to retain the A/C as well as our standard design which has been very popular thus far! Custom high-pressure fuel lines also available direct through us!
Turbo Kits
Twin Turbo Kits - Our twin kits come with all of the components needed to run a factory or factory style charger in the valley coupled with an aftermarket T6 BW S400 series charger to the side. We supply the aftermarket coolant tank, and we can even make one to utilize factory battery location, however not standard. Includes your hot side piping, new full 4" downpipe off the charger, air filter, and we can even supply the chargers for you as well!
Triple Turbo Kits - We build these to suit, so please contact us if interested. We have a vehicle in house to build on, and always encourage customers to bring their vehicles in for custom set-ups to be build on and directly for their vehicle.
Check out a video here of Mark Broviak of Danville Performance running our twin kit and making over 1000 rwhp!
[youtube]GwlanMu17Go[/youtube]
Intercoolers - We can build anything to suit your needs and goals!
Custom Fabrication
-We have the ability to essentially build anything for you that you could dream of! For the extreme one-off stuff, we like to have the vehicle in-house. We have done everything from traction bars to full out tubular pulling trucks!
With the launch of our new site, we are running an introductory sale to help get out products out there and on your trucks! :thumb:
Sale will run from NOW through July 31, 2013.
Take 15% off anything and everything on our website during this sale!
To take advantage, simply use coupon code: DuramaxDiesels at checkout!
www.HSPDiesel.com
Here are some of our products! Any questions feel free to ask!
Also, all orders will be shipped with an additional coupon to save 10% on a future order as well! :woott:
Exhaust
Downpipes - We offer a full line of high flowing downpipes for the LB7 (both emissions) through the LML.
Exhaust Manifolds - We have a few options for custom manifolds! Our manifolds are made from very high strength .120 wall Stainless Steel to prevent cracking or warping under high heat. You can also see the custom cut extra thick flanges we use! We offer these in both 2.00" as well as 2.25" versions!
Up-Pipes - We offer a direct bolt up, high flowing, super strong up-pipe for our manifolds in 2.00" or 2.25" to mate up to the pedestal, as well as offering a factory replacement up-pipe! We also sell them as a combo with our manifolds and up-pipes together for a great exhaust combination!
Pedestals - For pedestals we have to offer our billet design that will rival any product in the market for flow, quality, and strength. Our Billet pedestal is just that, cut out of Billet in a 2-piece design that allows us to keep the pedestal divided all the way through the entire pedestal into the divided T6 turbo flange.
We also offer a fabricated pedestal for those interested in that style. Both pedestals accept our manifolds and up-pipes as well as allow you to run a T6 charger in the valley!
Air Intake
High Flow Air Intake Tubes - For all years
High Flow Bridges - For all years, and our new flange design will outflow anything on the market!
Hot Side Tubes - For all years
Intake Manifolds
Billet 2-piece - Increasing plenum volume by 4-times, this intake manifold will give you the best performance of anything on the market. Cut in a 2-piece design from Billet, extensive design and flow testing have gone into this manifold! Custom high-pressure fuel lines also available direct through us!
A2W - Our custom fabricated sheet metal intake manifolds use only the best Bell cores, coupled with simply amazing welding and design to give you one awesome unit. These units are built per order and can be customized to suit. We have some a dual plenum design that was built to retain the A/C as well as our standard design which has been very popular thus far! Custom high-pressure fuel lines also available direct through us!
Turbo Kits
Twin Turbo Kits - Our twin kits come with all of the components needed to run a factory or factory style charger in the valley coupled with an aftermarket T6 BW S400 series charger to the side. We supply the aftermarket coolant tank, and we can even make one to utilize factory battery location, however not standard. Includes your hot side piping, new full 4" downpipe off the charger, air filter, and we can even supply the chargers for you as well!
Triple Turbo Kits - We build these to suit, so please contact us if interested. We have a vehicle in house to build on, and always encourage customers to bring their vehicles in for custom set-ups to be build on and directly for their vehicle.
Check out a video here of Mark Broviak of Danville Performance running our twin kit and making over 1000 rwhp!
[youtube]GwlanMu17Go[/youtube]
Intercoolers - We can build anything to suit your needs and goals!
Custom Fabrication
-We have the ability to essentially build anything for you that you could dream of! For the extreme one-off stuff, we like to have the vehicle in-house. We have done everything from traction bars to full out tubular pulling trucks!
