Hsp billet front cover

jdlover1

437 Cubic Inches
Oct 4, 2006
538
0
16
chapanoke,nc
Has anyone got pictures of it on the motor with water pump other than the hsp pic?. I really want to do this setup but would like to see or hear about some of the issues with it using the water pump. Other than the reverse rotation cp3 pumps with else is needed to make it work?
 

DieselmafiaLLY

Keep Calm and Go Crazy
Apr 6, 2013
1,102
0
36
Ontario, Canada
Has anyone got pictures of it on the motor with water pump other than the hsp pic?. I really want to do this setup but would like to see or hear about some of the issues with it using the water pump. Other than the reverse rotation cp3 pumps with else is needed to make it work?

Here's some pics of a truck we built here, other than the pumps you will need to make a bracket/tensioner for the alt, block off plate for the water pump and modify the suction side of the water pump
 

Attachments

  • 11650831_10203978705742212_52433078_n.jpg
    11650831_10203978705742212_52433078_n.jpg
    99.8 KB · Views: 200
  • 11652058_10203978705822214_1662546262_n.jpg
    11652058_10203978705822214_1662546262_n.jpg
    97.7 KB · Views: 185

RPM Motorsports

smokinum
May 13, 2008
3,271
10
38
Central Valley Ca.
I've got one on the Nova using a stock water pump and two rev rotation 12mm pumps. Mine was the first unit made, so there were a few small things changed (bolt holes tapped, oil pump clearance) on the revised covers. I don't run a belt though, so probably not what your looking for.
 

jdlover1

437 Cubic Inches
Oct 4, 2006
538
0
16
chapanoke,nc
that's what I'm wanting to see. I plan on running a water pump but not belt. thinking I will put battery in bed and just charge it up every pull.
 

jdlover1

437 Cubic Inches
Oct 4, 2006
538
0
16
chapanoke,nc
I see I will have a few issues to take care on the water pump. Since I still run turbo in valley I will have to come up with a way to run coolant to the turbo.