Hood stack

[DMAX497]

Just did a hood stack on my truck. Currently just have the black heat wrapped pipe sticking through. Trying to decide on doing a ring with the raw to come through it. Or a ring and a stack mounted to it on the hood that goes over the pipe...

Anyone got some pics?

Thank you!

 

[WolfLMM]

Idk how it applies to what you are doing, but I always wanted to use a 5" boat tail pipe, it'll have about a 7" diameter flange around it. They are rolled and angle cut to look good on 1/2 million dollar power boats. Id love to do my 2001 that way, I just can't bring myself to cut the hood.

 

[mike diesel]

Just leave the pipe sticking through the hood. Looks the best in my opinion!

 

[Muff]

Idk how it applies to what you are doing, but I always wanted to use a 5" boat tail pipe, it'll have about a 7" diameter flange around it. They are rolled and angle cut to look good on 1/2 million dollar power boats. Id love to do my 2001 that way, I just can't bring myself to cut the hood.

You should find a picture of that

 

[duramaxzak]

I have a Grand Rock hood stack kit on my puller with a 7" stack. The hood ring is stainless steel, but not polished.

View attachment 39245

 

[DMAX497]

I know what your talking about on the boat exhaust. That would be perfect. Keep the pics coming!

 

[Hot COCOAL]

http://www.vintagejetboats.com/attachment.php?attachmentid=8118&d=1356213870&thumb=1

This boat exhaust tip looks pretty sweet?

 

[Cknight199]

My fav is the raw exhaust either flush or 1" sticking out the hood. Flat cut


Sent from my iPhone using Tapatalk

 

[Utahski]

Looks real businesslike as-is. Leave this one tall enough to keep hot exhaust well away from the paint. For something fancier you can always add a polished outside pipe later.

 

[DMAX497]

I think I oughta at least put a small ring around it... We'll see tomorrow

 

[x MadMAX DIESEL]

My fav is the raw exhaust either flush or 1" sticking out the hood. Flat cut


Sent from my iPhone using Tapatalk

Agreed


Sent from my iPhone using Tapatalk

 

[A. Stock Lbz]

one of these will finish it off nice if you just do the pipe thru the hood. they have different sizes and designs.

http://www.rjracecars.com/412-Round-Exhaust-Flange-Aluminum-Prodview.html

 

[zf>allison]

Anyone run these on the street? I mean it's illegal here but I'd still do it lol.

 

[TwiztedMetal]

Have you checked out oldskool fab hood stack