Help with DPF and exhaust trouble codes

[Jtriqqs]

I have an 09 LMM and this is my first time tuning. I put an Edge CTS programmer on first then I did a MBRP 5 inch striaghtpipe. Im getting trouble codes that say that the exhaust temp gauges have high voltage and that the dpf sensor is also at high voltage. It wasnt a problem until a few days ago when the truck started cutting power because it says that there is soot accumulation....which is dumb because there is no dpf filter at all. How could I fix this? Should i get a different programmer?

 

[IOWA LLY]

You need a programmer that will delete the emissions codes. Not sure if there is an unlock for the edge to do that or not.

Sent from my SM-N920V using Tapatalk

 

[Jtriqqs]

You need a programmer that will delete the emissions codes. Not sure if there is an unlock for the edge to do that or not.

Sent from my SM-N920V using Tapatalk

What programmers will delete those codes?

Sent from my SM-G920V using Tapatalk

 

[phewitt56]

EFI live programmer

Sent from my SM-N920R4 using Tapatalk

 

[Jtriqqs]

Until i get one would it be possible to pull a fuse or something so it stops cutting power? Right now i have to clear the codes every 20 min to keep power.

Sent from my SM-G920V using Tapatalk

 

[roxyfever]

Prolly not. I dont know of anything to stop that other then delete tunes

 

[clrussell]

You have to tune it properly to delete the exhaust..

H&s can do it if you find one.

Efi live Is your best bet.

Put the old exhaust back on or tune it properly.

The older edge units will delete the exhaust..

 

[Jtriqqs]

Dang, guess ill start looking for an efi then.

Sent from my SM-G920V using Tapatalk

 

[clrussell]

Where you located. Someone can probably help you out

 

[tsd_billy]

Non Vendor

 

[tsd_billy]

And yes edge makes a competition hot unlock if you have a juice with attitude that deletes everything


Sent from my iPhone using Tapatalk