LMM: Heading to track tonite

WolfLMM

Making Chips
Nov 21, 2006
4,005
26
48
38
AL
Will be running truck tonite.

LMM CCSB
Limitless TC
Suncoast trans
68R
275/55R16 M&H DRs on PYOs
Built front end rancho 9000s


Anybody else with similar setup so I'll know around where I should be? Hoping for 7.8s or better:D
 

quinton

Active member
Nov 28, 2011
1,883
0
36
Granbury Tx.
Stock fuel? Few buddies and I well be going tonight too. But it at Texas motor speedway and it's not timed. Just bragging rights.
 

NRA223

New member
May 20, 2015
288
0
0
I would think 7.8X is realistic. If I remember your last track posts correct you has a pretty good 60 ft already so probably not a ton of difference there but the 50+ hp gain from the charger could gain a few tenths.
 

NRA223

New member
May 20, 2015
288
0
0
I would think 7.8X is realistic. If I remember your last track posts correct you has a pretty good 60 ft already so probably not a ton of difference there but the 50+ hp gain from the charger could gain a few tenths.
 

OregonDMAX

NOT IN OREGON, NO DURAMAX
Apr 28, 2013
3,964
8
38
36
Goodyear, AZ
I did a 7.8 1/8th with a 1.8 60ft and lost it after the 1/8th and totally ran out of fuel on the top end but managed a 12.7

Obviously completely different setups but it's doable on stock fuel.
 

TheBac

Why do I keep doing this?
Staff member
Apr 19, 2008
15,618
1,875
113
Mid Michigan
What's your weight, Wolfy?

I can see you hitting 7.7 or 7.6 if you're light enough and cut a good 60ft. Good luck to you.
 

WolfLMM

Making Chips
Nov 21, 2006
4,005
26
48
38
AL
Ding ding^^^

Long story short, track was closed but me and Buddy paid to open it up. Had prepped track all to ourselves all night. Having some stabilitrack issues and trans is not shifting when it is supposed to. Ahhh it never ends.

7.78 @ 85.5 1.61 60'
 

WolfLMM

Making Chips
Nov 21, 2006
4,005
26
48
38
AL
Ding ding^^^

Long story short, track was closed but me and Buddy paid to open it up. Had prepped track all to ourselves all night. Having some stabilitrack issues and trans is not shifting when it is supposed to. Ahhh it never ends.

7.78 @ 85.5 1.61 60'