got some new updates for the truck

sparepartsracing

spareparts offroad&fab
Mar 17, 2010
773
0
0
34
here some new updates

:36" tires
go rhino light bar
awaiting hid lights

190087_10150135550397240_647282239_6450231_604346_n.jpg
 

Akdiesel

IFS Hater
Aug 23, 2009
2,213
0
0
Fairbanks
Damn....how'd you get those tires to fit? Looks good just curious cause I wanna run 315/75s but wasn't sure if I should run bushwhackers or not
 

sparepartsracing

spareparts offroad&fab
Mar 17, 2010
773
0
0
34
has 2" leveling kit/3" rear blocks...has been lowered on 35's.and 33's 3" drop

i have 2/5" spacers in the rear and 1/2" up front and they dont stick out to far:thumb:
 

sparepartsracing

spareparts offroad&fab
Mar 17, 2010
773
0
0
34
i got them from a local company called s&d spring they have a website..but you can get this setup anywhere i believe the total cost was under $300...and dont be scared to cut your truck up with a sawzall ha ha:roflmao:
 

Akdiesel

IFS Hater
Aug 23, 2009
2,213
0
0
Fairbanks
I heard about spacing the bumper forward about 3/4"-1" and it helping clearances a LOT but haven't seen a write up as to how
 

Akdiesel

IFS Hater
Aug 23, 2009
2,213
0
0
Fairbanks
Idk...Tony B is the one who talked about it and I asked him but didn't get a real clear answer on how to do it just that's how he does it. I don't think the original Dirty Hooker looks goofy at all
 

sparepartsracing

spareparts offroad&fab
Mar 17, 2010
773
0
0
34
both:spit: i even cut my rockers when i was lowered on 35's its only a truck just remember that! i dont see a point of moving the bumper forward when you can just cut it level with the fender flares otherwise it looks retarted

well this summer i plan on doing a solid axle swap and maybe 6" lift and some 40"s or maybe ill run my 44's that are on my nissan powered chevy :)