Got My Stock LLY On The DYNO Finally! Put Down 753 with 72mm VGT

[HP@DDP]

Our dyno only reads high when in comparison with a SuperFlow but even then the numbers with be within 5-10hp. It reads lower than what most DynoJets produce as the other dyno on location was a DynoJet. JJ your truck was very impressive and I was also kind of worried about the rod bending factor with the LLY rods lol. I've seen them bend at 550hp before. Very good run and a very sharp truck indeed.

 

[Jscherbs]

Yeah we will see how long it last...

Same boat! Your shit was screaming on the rollers!!!

Good luck with the whole rods thing, just another worry.

 

[dmax711]

When I can get enough $$ together I'd like to get some rods and do a budget build. Stock heads with upgraded valve springs and see what I can push with the 72mm.

I told myself i was gonna do a "budget" build too, after buying rods,pistons and going over the list of things i had to order with dustin the budget part went out the window real quick.. And im by no means building to hold 1500hp

 

[Tony Burkhard]

No bent rods yet. Still ran good. I have been in the bent rod areana at 713 hp but much higher torque numbers. Truck pulling would kill the motor. The big tune is not for the street either. JJ's truck looks good doing awesome....

 

[Kutchey2]

Awesome run JJ... Can't wait to get to the track with that thing!

 

[arneson]

That is crazy. And im worried about 650ish hp. Hope it lasts awhile for ya.