gearing ideals

dirttymaxx

New member
Nov 15, 2010
334
0
0
sharpsburg,ky
heres our pull from fass last year
http://youtu.be/CWSfjupMQeg
we ran 33's an hit 3rd gear... 2:50min mark)

http://www.youtube.com/watch?v=um99C...layer_embedded
33's and hit 3rd gear(about the 4:00min mark)
also at the 3:00min & 4:40 & at the 6:00 mark that truck has been on top for the last year..

http://youtu.be/lTKMg-iS5xk
33's an hit 3rd gear(1:25min mark)

now when u look at the trucks we have the same thing they have just by looking at them..i do know they have replace the gears but im not sure what they went to. each truck has a built motor i do know that much..an if not, thats some of the best running truck's i have ever seen! lol

an as far a hurting out self with running that many rpm with a stock charger,if the dyno's right it makes power up to 4400-4500rpm..an i know im a little rich on the bottom of the fuel table,but when the truck comes up in the rpm the smoke has a black gray tent to it..grays what you want not coal black.

an in the 2nd video,full pull was 320' with one truck going 345' and in the pull off the winning pull was 298'...changed gears n sled..

like i said im lost lol
 

Sledheadxp800r

That was only my tow tune
Dec 13, 2010
1,151
0
0
39
CT
With the 03 in my sig stock turbo/injectors/cp3 I would be in 3rd gear by 10-15 feet every time I hooked.
 

dirttymaxx

New member
Nov 15, 2010
334
0
0
sharpsburg,ky
well got a little news on how staying in 2nd gear with 35's worked out..lets just say i think we were on a run...it rained half the day friday down here..so the track was muddy and sticky..

at the 275 mark we hit a rut/hole what ever you want to call it,and the truck went to hopping..well it didnt end to well..

threw the drive shaft out,and mite of took the gears with it,and maybe the t case.. i have a video on my facebook,ill try and upload it to youtube an post here.