Garrett 4094VGT vs. Danville 68mm

[Jetty LBZ]

just curious to know what the difference between the Garrett 4094VGT and Dan-ville 68mm is for future reference. saving for trans right now just planning ahead.

 

[Burn Down]

Best bet is to call Mark at Danville he sells both. Henry (Creatures of the night) also sells the 4094avnt as well...

 

[ikeG]

from what i have learned recently, a 4094 is off the shelf from Garrett and a Danville stg 1 or 2 are stock LLY turbos remanned to bigger wheels/housings etc. Call them. They sell all of them and also put a billet wheel in a 4094avnt

 

[Jetty LBZ]

checked out there page today. made my wishlist a littla bigger . thanks for the info everyone. i plan on calling next week!

 

[seth999]

they do the 68mm in a billet wheel too that I find pretty impressive:thumb:

 

[smkndmax05]

I have the 68mm with the billet. It sounds awesome and healthy on power!!!:woott:

 

[emiller3]

I really enjoy my 68

 

[tonydduramax]

from what i have learned recently, a 4094 is off the shelf from Garrett and a Danville stg 1 or 2 are stock LLY turbos remanned to bigger wheels/housings etc. Call them. They sell all of them and also put a billet wheel in a 4094avnt

x2 on this would like to know how the 4094 does with the billet wheel!

 

[Jetty LBZ]

thanks for input on the 68 guys and smkndmax05 i read the articale on your truck. that a sweet truck youv got :thumb:

 

[smkndmax05]

Thanks!!

 

[DuramaxTireSmoker]

Thanks!!

Was an excellent article! I'm so jealous!

 

[jonathancasey19]

Thanks!!

I had a guy hand me a magazine with your truck on the cover last night at a party. He said you gotta check this out!!!! One damn good lookin rig! :woott:

 

[8100 Power]

thanks for input on the 68 guys and smkndmax05 i read the articale on your truck. that a sweet truck youv got :thumb:

Thanks!!

My electricians son was randomally talking about it today also... Small world.

Nice truck!

 

[Jetty LBZ]

can you run this turbo without any tuning or is it way to big?

 

[smkndmax05]

Just let mark tune it when you get the charger!!! Give him or Larry a call. Real down to earth people and awesome service!!!

 

[2005LLY]

How does the 68mm do on stock injectors?

 

[smkndmax05]

Would be ok but you won't see it's full potential.

 

[TROJAN366]

I Just made 505 to the rear wheels with a 4094 w/ Danville's billet wheel. I haven't changed tunes after I changed the charger but have 40% tips going in within the next few weeks and will have EPR tuning the truck after that. I should have a better idea of what it will put down with good tuning and enough fuel soon. I do notice that it spools slower than the stock turbo at partial throttle but I think a lot of that is due to how much louder it is. You just dont notice the stock charger hasn't spooled because you don't hear it.