LLY: Garrett 4094R turbo Issues

Bill H

Street Toy
Aug 25, 2011
48
0
0
VA
Ok I've just done quite a bit of mods to an LLY and installed a 4094R Garrett turbo and I havent been able to get more than 30 psi of boost under WOT .
Ive been told by my PPE tech that I need to bump up to level 6,7,8 or 9 to get the boost up does any one have any thoughts here on what my boost should be ? I was thinking at least 40 to 43 psi under wot...
 
Jun 28, 2010
98
0
6
Did you check for boost leaks is the egr blocked?
How's the truck feel could the gauge be off? Maybe boost codes?
It's time to get efi live and it tuned from ATP ,mcrat ,bobo,moonshine.
Just a few to consider.
 

Dirtymaxx03

Active member
Aug 4, 2009
3,109
1
38
under WOT how much black smoke do you see? is it a slight haze or is it bowing a bunch of black smoke?
 

Bill H

Street Toy
Aug 25, 2011
48
0
0
VA
Low Boost

Ok Dan I,m on level 7 and the MAX boost is 30 PSI . No Leaks. What do you think???
 

Dan@PPE

Diesel Enthusiast
Aug 8, 2006
2,570
0
36
So Cal.
try a larger tune.

How is the smoke output? what kind of boost gauge? Where is it referencing boost at?

The boost number is really not THAT important, Mass air flow is...

Level 10 should yeild a peak of 38-42 psi
 

blk smoke lb7

<-----Lots of green $
Nov 8, 2010
5,694
0
36
57
belvidere,ill
Man you got the goods to go run it on 10 i had 10 running most of the time before efi you just need some good rods bill, and after efi live your gonna love that :D
 

Dan@PPE

Diesel Enthusiast
Aug 8, 2006
2,570
0
36
So Cal.
That is about spot on for a 40/94R (they are good up to about 650rwhp, depending on the setup)

DPC at what pulse width and timing if you dont mind me asking? was this on stock injectors or larger ones?