Full Exhaust & PPEI Tune on LML, what's next?

[Boostedrhino]

Hi everyone, I'm a new member to the forum, and I apologize beforehand if this is not the right section.

I wanted to ask you all, I have a 2016 LML, has the flo pro race exhaust, and the PPEI SOTF tuning... truck feels awesome, but it needs a little more juice in it...

What modification should be next?
Thanks in advance

 

[skintback]

If it was mine i would be looking at a good fuel lift pump Air Intake complete egr delete with 3'' hot/cold intercooler pipes with Y-bridge do a cp3 conversion using a sportsmen/CP3K pump or go stroked 10mm and a built transmission then a twin kit. Something like that

 

[Whitetail Addict]

I'd put a lift pump on it, then go from there.

 

[Boostedrhino]

If it was mine i would be looking at a good fuel lift pump Air Intake complete egr delete with 3'' hot/cold intercooler pipes with Y-bridge do a cp3 conversion using a sportsmen/CP3K pump or go stroked 10mm and a built transmission then a twin kit. Something like that

I'd put a lift pump on it, then go from there.

Sorry guys, I forgot to mention it had the FASS lift pump already

 

[WVRigrat05]

Built trans and bigger tunes

 

[zakkb787]

Definitely trans. And from the little bit I've read ditch the cp4 for a good cp3. Then go from there

 

[LBZ1991]

Built trans and bigger tunes

X2 and a full delete

 

[AZlml]

Replace cp4 with cp3 for reliability and then move onto power upgrades. Cp4 failure could cost more than a built trans and a few other power upgrades.

 

[Boostedrhino]

ok, so built trans and cp3 for sure,

will it be ok for me to build the trans, even though transmission tuning is not yet available? or should i wait till they release it,

also, does anyone have a link for a rebuilt kit for the trans and for a conversion kit for the cp3?
thanks in advance

 

[LBZ1991]

ok, so built trans and cp3 for sure,

will it be ok for me to build the trans, even though transmission tuning is not yet available? or should i wait till they release it,

also, does anyone have a link for a rebuilt kit for the trans and for a conversion kit for the cp3?
thanks in advance

Tuning isn't necessary if you build it. Call evan at limitless diesel for the trans. Wcfab has a pretty nice kit for the cp3 conversion

 

[IOWA LLY]

I would go with Fleece on the CP3 conversion kit.

I had trouble with part of the wherli Fab kit not fitting correctly on the one I tried to install. They weren't interested in making it right. They suggested I leave the Fleece performance part in that fit correctly. So I say just buy the Fleece kit from the get go.


Sent from my iPhone using Tapatalk Pro

 

[Boostedrhino]

ok, i found the kit,

apparently it's this one, correct?

http://fleeceperformance.com/2011-2016-lml-cp3-conversion-kit-with-cp3k.html

anyone have a link for the tranny parts?

 

[Boostedrhino]

Tuning isn't necessary if you build it. Call evan at limitless diesel for the trans. Wcfab has a pretty nice kit for the cp3 conversion

I checked his website, and saw nothing under the transmission section for the LML, i'll call him