Fuelab lift pumps

[LWATSON]

I sent Dustin a text, he said the pulse on my max effort tune is 2200.

 

[LWATSON]

This pump uses a filter that is 4 micron nominal/20 micron absolute. The Baldwin # is BF1212. I deleted my stock filter housing and would like a 2 micron filter. Anyone know if there is a 2 micron filter that will work in place of the BF1212? If not I'll remount the factory housing.

 

[Josh@Fuelab]

I can't seem to remember what forum I read it, but I *think* I remember someone that found a Cat crossover that was 2 micron. If I run across it, I'll post the link and/or part number.

 

[JoshH]

It looks like the BF1212 is a 1-14 thread filter. I use Donaldson P553203 filters that are that size. They are 99% efficient at 3 microns and 95% efficient at emulsified water.

 

[LWATSON]

Thank you Josh and Josh lol! Im going to get one of the Donaldsons in the meantime. And Josh@Fuelab let me know if you can dig up a number for that Cat filter.

 

[c20elephant]

Cat is pretty ambiguous in the rating of their filters, Donaldson would be my choice.

http://www.duramaxdiesels.com/forum/showthread.php?t=63295

 

[LBZ]

This pump uses a filter that is 4 micron nominal/20 micron absolute. The Baldwin # is BF1212. I deleted my stock filter housing and would like a 2 micron filter. Anyone know if there is a 2 micron filter that will work in place of the BF1212? If not I'll remount the factory housing.

CAT 1R-0750 as long as you don't care about having a drain on it. This is the one I will be running with a deleted stock filter housing.

 

[LWATSON]

CAT 1R-0750 as long as you don't care about having a drain on it. This is the one I will be running with a deleted stock filter housing.

Thanks for the info!

 

[LBZ]

The 1R-0749 and I believe the 1R-0751 is also the same. Just different length filters. I like the 1R-0750 because it is shorter.