Fuel sender ring

[Vrabel]

what's the secret to get the ring off? thing wont budge.

 

[Awenta]

Chisel and a hammer and round and round you go


Sent from my iPhone using Tapatalk

 

[Vrabel]

Guess it's tight. Wouldn't budge

 

[daned920]

Work it from different points. Hit a little, move a third the way around and hit, keep repeating. It'll come. Otherwise, see if your local parts house has the wrench

Sent from my SM-G930V using Tapatalk

 

[bmc1025]

Spray some lube and try again. I use a piece of oak and a heavy hammer.

 

[Vrabel]

still not budging.
might cut and buy a new one

 

[skintback]

Get the air hammer gun out :thumb:

 

[c20elephant]

50/50 mix of acetone and transmission fluid

 

[Vrabel]

air hammer took corners off.
Took almost half an hour with punch an chisel and finally got it.:woott:
Back together, but I might see if I can get a replacement before I put bed on.

 

[six5creed]

Had that truck been in a lot of salt? Mine came off no problem.


Sent from my iPhone 7 using Tapatalk

 

[TheBac]

What gets me is how expensive the proper J-tool is.

 

[Vrabel]

Had that truck been in a lot of salt? Mine came off no problem.


Sent from my iPhone 7 using Tapatalk

Top of tank was packed with mulch