Fuel 20x9 wheels

[WolfLMM]

Bros, which one of these wheels will sit flush or just barely past the fender on an LMM chevy.

20X9 5.75 backspacing 20mm offset

Or

20X9 5 backspacing and 1mm offset?

I'm wanting to fill out the wheel wells a little more, stock wheels are tucked in too far.

 

[BLKLMM]

Mine have 0 offset and sit flush with 285 nitto 420s

 

[WolfLMM]

So the 20mm offset would suck in about 3/4 of an inch. Humm that may be too much.

Are your wheels 9" wide?



Edit: wrong way

 

[BLKLMM]

Yes 9...I forget backspacing but I know its in 5s

 

[sickdiesel]

I ran 20x9 0 offset and it was flush.

0 offset will be 5" back spacing 5.5" backspacing. is +12 offset I believe

 

[WolfLMM]

Yea back spacing and offset are basically two different ways of looking at the same thing. Provided the wheel width remains the same.

A 9 inch wheel will automatically stick out 3/4 inch more than a 7.5(stock) on the same offset. I think stock wheels are 28mm?

I just don't want my wheels to stick out a mile lol.

 

[WolfLMM]

Pic of wheels