LMM: Front Torsion Bar Lifting

[ceide4489]

All I did was measure both sides of truck at wheel well or any other refence point and go under crank bolts 1 turn and go out remeasure

Cant rememebr how many turns needed. I never jacked up truck and had no issues. But if you max them out your ride quality does change

 

[2017McKinney]

how much can you crank them without having to get an alignment?

 

[WVRigrat05]

After a turn its gonna start wearing your tires, depending on what torsion bars you have and how worn they are.

On a good bar with say the snow package or z71 off road, one turn it gonna make the same difference as the regular keys/bars as two turns on a non equipped truck.

 

[2017McKinney]

So even if I only raise the front say (half an inch) id still have to get an alignment?

 

[WVRigrat05]

Depends on the truck in a way. I raised my LLY bolts buried and it took 5-7k miles before I started to see tire wear. I raised my LMM 3 turns and it chewed the outsides of the tires right now.