Front swaybar endlinks

[N2BRK]

This looks so crooked to me. Did I do something wrong? It just looks like they are out of whack. They are Dmax Store Kryptonte links.

Thanks
Wally

 

[N2BRK]

Pass side...

 

[N2BRK]

Not sure if the mounts should be turned or if this is right?

 

[CentolaCCSB]

Turn the mounts on the lower control arm 90 degrees it will solve that problem

 

[N2BRK]

it does look that way to me. I noticed when I was checking my ball joints, and I think I put them 90 out the wrong way - oops.

 

[N2BRK]

well, I can see where I sent wrong. If you loosen the nut they are straight, lol. The mount sucks down on an angle when tightened to the LCA. So I wound up tightening them back up and then rotating them with a big lever to fine tune.

Now onto looking into replacing the ball joints

 

[c20elephant]

You need a set of these to complement those links.....
=

=
=

=
=

 

[N2BRK]

NICE!

In the spirit of upgrading... I'm thinking Kryptonite UCA first, now that my uppers need replacing.

 

[JoshH]

You need a set of these to complement those links.....
=

=
=

=
=

What brand are those sway bars?

 

[N2BRK]

I think those are from Roadmaster, right?

 

[c20elephant]

I think those are from Roadmaster, right?

Yes,