Freighttrain at springfest

[02freighttrain]

We ran a 11.67 with a best mph of 118.79 on fuel at Martin last night. The truck shifted like crap and it was a slippery mess. No excuses. Team Salad had the Fastest truck at the track. Glad Pat wasn't there, not really.........Here's a vid of the first pass.

http://www.youtube.com/watch?v=9Rig7oT5yLI

 

[tinman22]

I think you ran that run against me, i'll check my slip. well done. bad ass truck. clean and mean thumbs up and congrats

 

[mick]

Thats Haulin Ass

 

[Kat]

Nice runs :driving:

Sorry we missed it

To answer your question on DP. Pat is getting a little better everyday

He hasn't had a smoke or a drink of any kind in 12 days

 

[Diesel Pilot]

Good times.

Sounds like the TCM is going to need time to learn all that power.

Did you get on the dyno?

 

[Stingpuller]

Nice times

Thats cool to be the fastest. With that mph you should really run good when you get it to shift correct. CONGRATS Jeff

 

[SmokeShow]

thats awesome!!

Did you pull double duty and pull on Sun. also? If so, how'd you do??


C-ya

 

[duramaxin14]

Steve I am going to try to get u some real train horns for that thing

 

[LB7Diesel]

Nice run Steve... Way to represent FLA!!!

 

[The Neens]

Nice work Steve...Congrads!!!

 

[dieselson]

That is totally awesome and sick! It looked like you were running against another fast duramax, what was he packing? And what did he run.

 

[sweetdiesel]

steve congrats

i just love that truck!!! once she starts shifting better look out

 

[hdmax]

Team Salad had the Fastest truck at the track.

You must be telling lies, because there is no way on God's green earth that TTS would ever be slower than anyone else:hug:

 

[dieselson]

You call that shifting like crap, that is NOT shifting like crap, you've seen the vid our truck, I would kill to have it shift like that

 

[Diesel Pilot]

I love the huge flume of smoke when you do the burnout. I bet it will send smoke into space when you pull it.

 

[jimdmax]

nice run

 

[duramaxin14]

The cummins boys in wauchula are talking some heavy smack i hope u can show them who there daddy is

 

[02freighttrain]

Thanks for all the nice comments. BoBo's truck had several pounds on me or it would have been a lot closer.

The Dyno results will be posted by Dunbar at some point.

We made 670 with no Map sensor - no Baro sensor - and no MAF sensor.

The motor was only getting around 20 degrees timing in this setup.

I think we only got beat on power and torque by Nasty, Eric, and Landon

I think we made 1160 or so on torque. I've got the sheets somewhere.

The motor never went over 3600 on the dyno with the timing issue.

It also only wound make 45 lbs of boost.

It made 60 at the track.

We did rob a MAF sensor from Eric. Also hooked up the baro and MAP before we went to the track. MPH was much better. The tranny did not like it though.
Time for a co-pilot.

 

[dieselson]

Nice 670, the torque seems slightly low, although it could be the dyno, but when nasty girl did 9xx it was below 1500 torque

 

[02freighttrain]

Nice 670, the torque seems slightly low, although it could be the dyno, but when nasty girl did 9xx it was below 1500 torque

There were three other built motors on the dyno (Similar to mine). I think we made more torque than them. We'll wait for the numbers.

The word is that the decompressed motors are making less torque, which stands to reason. It's just fine with me. 8 dyno pulls on Friday, 3 on Sat and 4 passes down the track. I brought it home running.

The lower torque figures are just fine with me.