LBZ: First start, which fuse to pull?

[Wikid]

Hey guys im about to fire up my new motor but wanted to build some oil pressure first. On an lbz what is the best fuse to pull so it wont fire. I kept seeing ficm to be pulled but i dont have a fuse labeled that in my fuse box.

Sent from my SAMSUNG-SM-G930A using Tapatalk

 

[Blackmax123]

There's no ficm on an lbz. I cranked mine a while without priming the fuel system. Then primed the fuel system and fired it up. Within seconds it had oil pressure.

 

[tsd_billy]

Pull the fuel pump relay and clamp off the cp3 feed line


Sent from my iPhone using Tapatalk

 

[tsd_billy]

Or your vats fuse


Sent from my iPhone using Tapatalk

 

[Wikid]

Thanks

 

[jlawles2]

Just pull the bail connectors on top of the engine. will turn over but not start.

 

[henery97]

I've always just opened the bale connectors too..

 

[malibu795]

I jump the starter, also have a mechinal oil guage plumbed in.. the melling 316 oil pump will do ~40psi with 60° oil temp while cranking...
Also once primed the starter will pick up cranking speed as well