First sled pull this season

red1977

New member
Nov 15, 2010
786
0
0
46
Ogden Utah
Well my first sled pull this season is tomorrow. Think I got the truck set up good, let me know what you think.

Dropping the tbars all the way down.
Spring clamps on front and back of leaf springs.
1,000 lbs of weight to add to the truck.
285/75/16 on pyro half tread good year wrangler mts.
Going to run 30 psi in the front tires and 50 psi in the back tires.
Air bags are going to have 90 psi in them that will put my hitch right at 26 inchs.
Going to crank the pressure up on my lift pump to try to help me hold rail pressure.

Question is with my built trans do I want to run tow/haul mode or leave it in regular mode and use my lock up switch?
 

jgt1982

New member
Jul 11, 2012
83
0
0
tn
hey guys first off i have seen some yall pulls on youtub and might i say yall have some bad trucks . i am thinking of hooking my truck two or three time to see what is going to do but i am new to truck pulls i have done alot of drag racing but never any pulls would any of you be willing to throw out some good info to help me out thanks
 

red1977

New member
Nov 15, 2010
786
0
0
46
Ogden Utah
I took 6th place out 17 trucks i messed the launch up but the set up hooked good. I got another one next weekend.
 

RedHotGMC

stock
Jan 16, 2012
339
2
18
Northern Utah
I bet that was an interesting pull in the mud, how did everyone do overrall? Kinda hard to tell by the vid but were you easing into it the first 50' feet and rolling into it?
 

red1977

New member
Nov 15, 2010
786
0
0
46
Ogden Utah
I bet that was an interesting pull in the mud, how did everyone do overrall? Kinda hard to tell by the vid but were you easing into it the first 50' feet and rolling into it?

Ya I eased into holding brakes trying to get the turbo to light then hammer down but I held the brakes to long. It was interesting in the mud lots of trucks had a hard time. the top 5 were up towards 300 ft plus.