Finally hit the 11s

[SickLL7Crenshaw]

Made a [email protected] pass last night. I'm happy with the results as the DA was around 4000ft last night. Stock bottom end lly and weighs around 6800 with me in it. Only cut a 1.72 60ft so I know there's more left in her. Also anyone know the fastest stock 5 speed has went? My buddy put my stock trans LB7 tow truck on the track last night also and ran a 13.38@100 weighing 7100lbs. I'm pretty excited as I've wanted a 11 sec pass for a long time! :woott:

 

[blitzin247]

Congrats! It makes all the time, labor, and expense worth it! :woott:

 

[Evan@InglewoodTrans]

Nice run :thumb:

 

[paint94979]

IIRC stock motor goes to bucks truck... 11.01. Stock turbo and nitrous

 

[SickLL7Crenshaw]

IIRC stock motor goes to bucks truck... 11.01. Stock turbo and nitrous

Sorry Nick I meant stock 5 speed transmission truck.

 

[lil bleur]

Made a [email protected] pass last night. I'm happy with the results as the DA was around 4000ft last night. Stock bottom end lly and weighs around 6800 with me in it. Only cut a 1.72 60ft so I know there's more left in her. Also anyone know the fastest stock 5 speed has went? My buddy put my stock LB7 tow truck on the track last night also and ran a 13.38@100 weighing 7100lbs. I'm pretty excited as I've wanted a 11 sec pass for a long time! :woott:

Nice!! Happy for you!!:thumb: Looking forward to bein thr also! I got to get some slicks and build my trans first. My best to date on my 90hp tune is 13.7 @ 105, stock trans and I'm 2wd on N420s. Its got a lot more in it once the trans gets built and traction gets figured out!:banging:

 

[SickLL7Crenshaw]

Nice run :thumb:

Thanks Evan, I think I'm gonna get rid of the trac bars and try cal tracs for next season. I'd love to cut consistent 1.6xs at the track.

 

[SickLL7Crenshaw]

Went back to the track again. DA was 4100ft last night. She's still alive so Im happy.

 

[1TRIKHD]

Nice pass man!:thumb:

 

[Josh154]

That's a good 60'! What's your fuel and air setup?

 

[SickLL7Crenshaw]

That's a good 60'! What's your fuel and air setup?

Im running a s475/ stock kit from SDP, 40% nozzles and a CP3k

 

[IOWA LLY]

Nice run! What's your truck weigh in race form?

Sent from my SM-N920V using Tapatalk

 

[Josh154]

Nice man. That's a healthy setup, how long you been pushing that much power on stock motor?

 

[Harbin_22]

Nice passes for a stock LLY! What all do you have for suspension? With your similar air and fuel setup, with QA1's and CalTracs, I was getting mid to low 1.5x 60'.

 

[SickLL7Crenshaw]

Nice run! What's your truck weigh in race form?
Sent from my SM-N920V using Tapatalk

Thanks! It's right at 6750lbs

Nice man. That's a healthy setup, how long you been pushing that much power on stock motor?

Thanks, I've been running sub 12.5s since 2012 and sub 12.2s for the past 2 years. About 200 passes under 12.5

Nice passes for a stock LLY! What all do you have for suspension? With your similar air and fuel setup, with QA1's and CalTracs, I was getting mid to low 1.5x 60'.

Thanks Kyle! I have drop keys, overload removed, drop shackles, Caltracs, rancho 9000s.

 

[Josh154]

That's sweet it's held together that long. I'm getting ready to do a turbo swap and up pipes and I'm hoping to be running under 12.5s. I want to get some bigger injectors to try and save my Pistons lol

 

[SickLL7Crenshaw]

That's sweet it's held together that long. I'm getting ready to do a turbo swap and up pipes and I'm hoping to be running under 12.5s. I want to get some bigger injectors to try and save my Pistons lol

Yes sir injectors will help for sure.

 

[custom8726]

Very nice! :thumb:

 

[1TRIKHD]

Im running a s475/ stock kit from SDP, 40% nozzles and a CP3k

I'm going to be running a BW s472 sx-e with a wagler steer intake with stock fueling and then getting it dialed in by Idaho Rob or Kory. Hope I have some decent numbers like you.

 

[SickLL7Crenshaw]

Very nice! :thumb:

Thanks Jason!

I'm going to be running a BW s472 sx-e with a wagler steer intake with stock fueling and then getting it dialed in by Idaho Rob or Kory. Hope I have some decent numbers like you.

Yes sir I've had a hard time trying to run into the 11s at 3500ft+ elevation. I really wanna go to Ennis or somewhere and see what this thing would run down at low elevation.