filter and pump info needed

[delong_1]

Im trying to gather parts for my fuel system, i am going to use one of the aeromotive pumps that we normally use in our 6.0 and 6.4 fuel systems. the major problem is that the pump is a -12 line so i need a filterhead that is atleast -10 so flow to the fuel block isnt restricted and the pump doesnt burn up.

On the ford kits we pull the fuel through the 2 micron filter then pump, with the picky lb7 injectors i dont want to chance it and not filter after the pump.

anyone have any ideas?? i thought maybe i could just put the filter after the pump but the manufacturer says its not reccomended.

 

[delong_1]

Anyone??

 

[ripmf666]

I'm thinking of something from my race car setup. and it should work for you just have to look up the part numbers all from Jegs or Summit.

 

[delong_1]

havent really had the time to do anything with this but i need to get something done, stock filter head is leaking..

anyone know of a good filter/filter head setup with at least a -10 inlet outlet, hopefully 2 micron with a water seporator?

 

[Burn Down]

Cat 195-1068 filter base.
1ea 326-1642 water sep. filter 10 micron
1ea 1R0749 fuel filter 2 micron

 

[delong_1]

what size inlet outlet, reason im really wanting at least 5/8(-10) is im not getting any positive pressure on some of the bigger tunes, i will be adding a bigger pump but i cant justify that if i add a filter setup that is going to cause a bunch of restriction.

 

[Burn Down]

-12 o-ring boss I think, the black lines in the photo are 1/2" so I had to adapt down. I can get the exact size once I go to work tomorrow.

 

[bullfrogjohnson]

Donaldson P562262 is what I run. Its has 5/8" inlet/outlet and I run a CAT 1R-0749. The filter head will flow 180gph and I forgot what the filter will flow but it will flow more than I need.

 

[-Shep-]

Cat 195-1068 filter base.
1ea 326-1642 water sep. filter 10 micron
1ea 1R0749 fuel filter 2 micron

I keep CAT 175-2949's here at the shop. They are completely enclosed with a drain valve. From what I've been able to search, you should be able to use that instead of a 326-1642 that has the spin on bowl...right?

BTW, nice set up BurnDown.:thumb: