Got a few more things done with it, only working on it one day a weeks is kinda slow going. Also got the cognito support kit installed. The other brace was binding things up with the kryptonite kit all smooth now...
Engine build
- Thread starter moparkxracer
- Start date
What's the benefits of the billet rear cover? Does it help stiffen the engine? Sure looks great, to bad it never gets seen
.
.
X2 on the billet rear cover. Curious if it’s just pretty or if it benefits anything. Either way it looks nice!
It’s a LOT stronger then the stock one. My stock one had most of the threaded inserts striped out. This cover lets you get the lower two bolts back that are removed when using a lower engine girdle. It also get rid of the pass side coolant cover that leaks that is replaced with a pipe plug
Most would not need the cover so don’t think it’s for everyone
Most would not need the cover so don’t think it’s for everyone
Off topic too, but what is your wheel/tire combination and drop? Sorry if that’s been answered already.
Tires are 305/50/20 not sure the offset of a 10 inch wide BMF novakane. The drop is abt 4 on the front and 5 in the rear. We cut the overload spring to make mini lift blocks to get some rake back into it.
The steering wheel is a GT grant one, I got it from summit racing. Yes the cv shafts clear the coil overs. Looks tight in the pics but there is more then enough room.
Thank you for the compliments on it.
Thank you for the compliments on it.
That is what I commented.... they have a couple different options on colors red, blue and black. I had a “situation” getting the air bag off, make sure you have a friend here to help out. I didn’t and ended up with me needing a new clock spring due to ripping the wires out .
Last edited:
That sucks.That is what I commented.... they have a couple different options on colors red, blue and black. I had a “situation” getting the air bag off, make sure you have a friend here to help out. I didn’t and resuleted in me needing a new clock spring due to ripping the wires out.
.
Sent from my VS985 4G using Tapatalk
Thank you, it turned out really good. He did my amp covers as well. I’m just not that far with it all yet.
Duramax 6.6 2006 model
Can anyone help me with the torque on the head bolt on this engine:hello:
Can anyone help me with the torque on the head bolt on this engine:hello: