Electrical issues

[2004LB7]

Also note that balances rates are to be taken with the engine warmed up and in neutral and another in drive

I don’t know why it does that when I quote!


Sent from my iPhone using Tapatalk Pro

Next time it does that, hit the edit button and before charging anything or hitting save, screenshot it and post it up so we can see if you are doing something different or perhaps it's Tapatalk doing it. I don't use Tapatalk so not sure what it does

 

[Ron2145]

Also note that balances rates are to be taken with the engine warmed up and in neutral and another in drive

Ah, ok, those balance rates were park and drive.


Next time it does that, hit the edit button and before charging anything or hitting save, screenshot it and post it up so we can see if you are doing something different or perhaps it's Tapatalk doing it. I don't use Tapatalk so not sure what it does

Will do.


Sent from my iPhone using Tapatalk Pro

 

[Ron2145]

Of course it worked that time!


Sent from my iPhone using Tapatalk Pro

 

[2004LB7]

Park and neutral are the same as far as the engine is concerned

 

[NC-smokinlmm]

Isn’t there an issue with the edge telling which injector is actually displaying or something along those lines?

 

[Ron2145]

Isn’t there an issue with the edge telling which injector is actually displaying or something along those lines?

If that’s true, then maybe I need to have someone check it with good a good scanner.


Sent from my iPhone using Tapatalk Pro

 

[2004LB7]

If that’s true, then maybe I need to have someone check it with good a good scanner.


Sent from my iPhone using Tapatalk Pro

I think you need to reset your Tapatalk. Or maybe check for updates or something. You're the only who seems to have that issue with it messing up the reply. Or maybe stop using Tapatalk until the issue is resolved

 

[Ron2145]

Ok


Sent from my iPhone using Tapatalk Pro

 

[2004LB7]

Isn’t there an issue with the edge telling which injector is actually displaying or something along those lines?

I only remember a while back where EfiLive and some other scanners where not showing the correct cylinder number. I was guessing it was showing firing order instead. But no confirmation on the issue. EfiLive said they used the same code/strategy that the Tech2 used so it should be the same. But obviously wasn't. Don't know how or if edge had this same issue

If it was mine I'd use the injector shut off function to disable the injector and then use in inductive voltage tester to see if it is still on or not.

 

[1FastBrick]

And you are aware that number 1 is on the passenger side on this motor?

 

[Ron2145]

Yes. Thank you


Sent from my iPhone using Tapatalk

 

[1FastBrick]

Yes. Thank you


Sent from my iPhone using Tapatalk

Just making sure as some are not aware since that's normally how GM does it.