EGR blocker plate or delete kit?
- Thread starter DirtymaxLbZ2006
- Start date
I used the blocker plate until I upgraded to a fixed charger. I think the gains are minimal at best doing the full delete over the blocker plate.
egr
hi im new to this dont know how or were to post this but ill just ask i have 05 lly bone stock and i want to get egr blocker plate will it throw codes or check engine light if i do if so how can i stop it
hi im new to this dont know how or were to post this but ill just ask i have 05 lly bone stock and i want to get egr blocker plate will it throw codes or check engine light if i do if so how can i stop it
My vote is to delete it,your probably going to do more mods in the future and it will be in the way or you will want better flow on the cold side (were the egr delete is)
Yes it will but if you get efi live your tuner will be able to turn those check engine lites off for you.
No emission tests so ill prob just do a delete what one is good and can I just use a fingerstick to keep away the codes. Tryin to stay away from a tuner
Why do you want to stay away from a tuner?
Tuners are your friends :hug::roflmao:
My crew cab has the RDL delete and 3inch y bridge. I'm putting an SDP kit on my regular cab
couple of my buddys have them on theres and if they turn them up they will go into limp mode or low fuel pressure i just wanna build mine first
intake,exhaust,exhaust manifold, intercooler and tubes just stuff like that for now.how much hp can the tranny handle safely without slippage
6speed is 80-100hp on average depending on the driver and how its driven. I drove 40k on a 120rwhp tune stock trans, no limps ect. Pulled trailers to. Nothin wrong with a tuner tho, just dont crazy. U could always throw on the trans go jr for alittle help. But definitely savin for the build is a smart way.
If you have an FE9, more then likely you'll be ok. All fingerless trucks will throw a code, but an FE9 will not illuminate the CEL when this happens which is why most FE9's can run blocked and fingerless.What is a FE9 - Emissions code, you'll find it on the spec list in the glovebox. There are a few different packages, California emissions and Northeast emissions to name a few. Basically if you have anything other then Federal Emissions (FE9), your probably gonna need a fingerstick