efi classes
- Thread starter silverbullett
- Start date
Currently I don't have anything on the radar, but like many of the other areas where I have classes, I am always interested in new venues....
To that end, if you'd like to PM me your contact info we can discuss it further. I'd be curious to know how much interest there is in your area. I know in northern California i have quite a few guys that have hit me up -it's just not the right time of year to have a class there yet....
So - let me know!
-->Zach
To that end, if you'd like to PM me your contact info we can discuss it further. I'd be curious to know how much interest there is in your area. I know in northern California i have quite a few guys that have hit me up -it's just not the right time of year to have a class there yet....
So - let me know!
-->Zach
Well that sounds like something we should definitely start discussing. I'm not sure where silvrbullet is from specifically, but perhaps there are venues you can think of with a dyno, or with access to a mobile dyno - that would willing to have the class come to their shop for the weekend. If you have suggestions, let me know. I know in northern CA I have a likely location, but not sure in southern as there are so many places there...
So - any ideas you guys have - throw them out or PM me, after I get past this Texas class this weekend, i'll start digging in to that and the other east coast possibilities we have going for us right now.
Thanks!
So - any ideas you guys have - throw them out or PM me, after I get past this Texas class this weekend, i'll start digging in to that and the other east coast possibilities we have going for us right now.
Thanks!
i believe theres a dyno in the temecula area southern cali not sure the name of the place but the are on the efilive websites calender but seems like they never have a diesel class
underground diesel performance if tryin to set a class up in either vegas or in southern cali. they only need about 8 more name and they will figure out a date and location....heres the link...http://www.socaldieseltrucks.com/forums/showthread.php?1791-EFIlive-Beginners-Workshop&p=30375
Vegas would be an awesome class to go to... I LOVE vegas... we could make it week long one! (It would probabably take a week to teach it with all the recovery time included)
I'm in the SoCal area, and interested in a class as well. Vegas would work, since I'm sure someone in SoCal would want to Car Pool
We will be holding a class here in Las Vegas shortly. We are in middle of expanding our shop and should be ready for the class to be held here in July.
We have had classes all the way on the east coast so we dont mind traveling. We'd have no issue what so ever putting one together in Cali.
We also are in process of having one in Denver colorado in a few more months as well.
If you have interest you can PM me or email me [email protected]
We should have info up for the Vegas class in about 2 weeks.
We have had classes all the way on the east coast so we dont mind traveling. We'd have no issue what so ever putting one together in Cali.
We also are in process of having one in Denver colorado in a few more months as well.
If you have interest you can PM me or email me [email protected]
We should have info up for the Vegas class in about 2 weeks.
Perhaps to provide some overlap - here are the classes / locations that are currently being discussed (NOT all of them are iron clad yet) for our classes:
Colorado - (TBA - Denver - Lincoln Tech Community College - August)
Ohio - (New Era Diesel or Ohio State University - November)
Florida - (TBA)
Pennsylvania - (TBA - September)
Rhode Island - (TBA - August/September)
South Dakota - (TBA - Rapid Diesel -July)
Utah (@ Industrial Injection in October)
Utah (TBA - Boostworks in St. George)
Again - many of these are NOT locked down or set in stone, which is why they haven't been formally announced. Some of these are new discussions / areas in the past couple of weeks where class suggestions have occurred and interest has been high. This weekend I will be in Texas holding a class, then the 16th-17th June I will be in Iowa at Iowa Central College. I am trying to leave a couple months mostly open during the summer to go have my own weekend fun at the track / pulls, as well as time with the family... Been busy with holidays, TS, and other local things happening here as well as a large backlog of getting tunes out the door...
The classes cover Duramax and Cummins tuning for both days, and include the training books, lunch as well as 'classroom tuning' that is then flashed into demo trucks on the dyno and ran as well as data logged so we can review results as a class. Each day is approximately 8 hours.
As with the other thread running on here - anyone having location suggestions, feel free to let me know! I may not get back to you immediately - but i DO get back to everyone that PMs me.
Thanks!
Colorado - (TBA - Denver - Lincoln Tech Community College - August)
Ohio - (New Era Diesel or Ohio State University - November)
Florida - (TBA)
Pennsylvania - (TBA - September)
Rhode Island - (TBA - August/September)
South Dakota - (TBA - Rapid Diesel -July)
Utah (@ Industrial Injection in October)
Utah (TBA - Boostworks in St. George)
Again - many of these are NOT locked down or set in stone, which is why they haven't been formally announced. Some of these are new discussions / areas in the past couple of weeks where class suggestions have occurred and interest has been high. This weekend I will be in Texas holding a class, then the 16th-17th June I will be in Iowa at Iowa Central College. I am trying to leave a couple months mostly open during the summer to go have my own weekend fun at the track / pulls, as well as time with the family... Been busy with holidays, TS, and other local things happening here as well as a large backlog of getting tunes out the door...
The classes cover Duramax and Cummins tuning for both days, and include the training books, lunch as well as 'classroom tuning' that is then flashed into demo trucks on the dyno and ran as well as data logged so we can review results as a class. Each day is approximately 8 hours.
As with the other thread running on here - anyone having location suggestions, feel free to let me know! I may not get back to you immediately - but i DO get back to everyone that PMs me.
Thanks!
Last edited:
If there was a class close to Illinois/Wisconsin boarder I would jump on it like a fat man on cake! And also if I was to buy your EFI book I would get a discount on the class correct? I thought I read that somewhere.
Yes sir! If you buy the books ahead of time - and then want to register for a class, you can contact us prior to signing up for the class you want to attend and get a coupon code to enter at checkout that will take some off the cost of the class. You will receive a NEW and updated copy of the books at the class (so everyone is working from the same thing and taking home the same thing). Sometimes there aren't many updates, but I do what I can to get the books as current as possible prior to the classes so everyone has the most up to date stuff to take home.
Not sure when i'll be having one in your neck of the woods again, but should be having one in Ohio before the year is over... Just getting back to working on the next round of classes. Had some medical stuff slowing me down quite a bit, but finally got some wind in the sails again the past day or two and trying to follow up on everything I have had to push aside - so keep an eye out for more updates to the class locations!
-->Zach